I’m going to take a wild guess and say your COR and/or CTCSS (and possible the duplex setting) is wrong. Make sure duplex=0 or duplex=1 (see http://ohnosec.org/drupal/node/84). Then at the Asterisk CLI do a "rpt stats <your node number>" and make sure the “Signal on input………..: NO/YES” is following your keyups. -- Tim :wq On Apr 15, 2014, at 6:50 AM, moran <moran.nicholas@gmail.com> wrote:
I have installed acid on a PC and set up the node from advanced repeater specialties. It is plugged into a UV five are beofang hand-held. I am able to connect to the All-Star network. But every time I transmit or receive a signal. I get a voice message it says node 40720 timeout. I have research this to the best of my ability could someone please give me some help. Thank you Nick Moran KC3AIV 73 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.