Perhaps someone else who uses the DMK can answer you better than I who does not use one but, your options: ;carrierfrom=no ;carrierfrom=dsp ;carrierfrom=pp carrierfrom=ppinvert ;carrierfrom=usb ;carrierfrom=usbinvert ;carrierfrom=vox Im just guessing but what if that COS line is pushed to ground and not float open at 0v but grounded ? Does it drop? ...mike/kb8jnm
its new install, and yes it is the DMK URI. and yes repeater is hooked up.
receiver COR is active high (+5V when signal is detected) but it is doing this without any signal from the receiver cor and with signal from cor.
in usbradio.conf for COR detect I have tried DSP,USB,USBINVERTED nothing changes with the output.
On Fri, 26 Jun 2015 22:17:31 -0400 Robert Newberry <N1XBM@amsat.org> wrote:
Is this a brand new install? Is there a radio hooked to your sound card? I've run into this once where the COR pin was active high, thus disconnecting the DB25 caused it to think there was a signal on the input thus causing PTT. Are you using a DMK URI? Are you getting ptt indication?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.