You can also take a look at softether as well -- it supports OpenVPN and runs on both Windows and Linux. There is a GUI based config utility that runs on Windows (and under Wine) that makes it very easy to setup a server -- it will even generate the OpenVPN client profiles for you. https://www.softether.org/ Stacy KG7QIN On 01/04/2016 06:33 PM, Justin Harris wrote:
You could do this with OpenVPN. Portable node would have to be a client and a server at your QTH like you mentioned. OpenVPN would have to be setup in bridged mode on the server so that your network can send traffic back to the VPN client. It's very feasible but will take some work - most of it on the QTH side.
Just remember when you're doing this how the traffic will need to flow to get to a remote VPN client and that your portable node is acting as a server on your WAN.
Hopefully this helps.
Take care, Justin Harris KG7FKJ
On Jan 4, 2016, at 5:43 PM, Tower DIVA <tower.diva@gmail.com> wrote:
Is it possible to set a portable node up to where you do not have to access the router and do port forwarding where you connect it to be able to gain operability? Could a VPN be set to do tunneling to say, your home QTH and bypass this step? I have not done any VPN work in linux. Thanks for any help!!! Keri KB0YNA Mesa County, Colorado RACES _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.