okay, I have attached a copy of uridiag. Its the program that is used to troubleshoot uri devices. Try one of the numbered options that output a tone and test for it. If you really wanna be snazy, use the 'c' option to printout the pinout for the diagnostic loopback connector necessary, make one, and you can do full production tests on it with this program. cd /usr/src tar xzvf /path/to/where/the/file/is/uridiag.0-3.tar.gz #This will create /usr/src/uridiag cd uridiag make Then you can run it by doing ./uridiag From: n9yty@n9yty.com To: app_rpt@lists.illiana.net Date: Thu, 29 May 2008 20:28:34 -0500 Subject: Re: [App_rpt] New USB Fob attempt... On May 29, 2008, at 7:45 PM, Jim Duuuude wrote:I have seen this problem. Are you using a USB hub, or are your devices directly connected into your computer?? Unfortunately the USB FOB is connected right to the computer, and it is the only USB device connected at all. The computer only has two USB ports, just for the sake of completeness I will try the other one. Steve