Re: [App_rpt] New USB Fob attempt...
okay, I have attached a copy of uridiag. Its the program that is used to troubleshoot uri devices. Try one of the numbered options that output a tone and test for it. If you really wanna be snazy, use the 'c' option to printout the pinout for the diagnostic loopback connector necessary, make one, and you can do full production tests on it with this program. cd /usr/src tar xzvf /path/to/where/the/file/is/uridiag.0-3.tar.gz #This will create /usr/src/uridiag cd uridiag make Then you can run it by doing ./uridiag From: n9yty@n9yty.com To: app_rpt@lists.illiana.net Date: Thu, 29 May 2008 20:28:34 -0500 Subject: Re: [App_rpt] New USB Fob attempt... On May 29, 2008, at 7:45 PM, Jim Duuuude wrote:I have seen this problem. Are you using a USB hub, or are your devices directly connected into your computer?? Unfortunately the USB FOB is connected right to the computer, and it is the only USB device connected at all. The computer only has two USB ports, just for the sake of completeness I will try the other one. Steve
On May 29, 2008, at 8:38 PM, Jim Duuuude wrote:
okay, I have attached a copy of uridiag. Its the program that is used to troubleshoot uri devices.
You know, if anyone tells you that you guys don't suffer fools well, tell them that you do. :) I haven't taken everything apart to see what I did, but the upshot is that the I seem to have txaudio and auxaudio flipped on the DB9. I don't know if it was on the FOB end or the DB9 end, but since my previous tests with just pumping audio were likely stereo source files it explains why I had audio then but not when going through app_rpt. With uridiag I received tones on the second channel, not the first, which clued me in. I REALLY apologize for wasting your time, but this is a good one for the archives. :) When I find time (hopefully this weekend) I will dig into exactly what I wired wrong, I sure thought I had double-checked it all. I even connected to a few nodes tonight (monitor mode) and it seems to be working great. Now to read up on how the rest of it really works and get the link up. MANY THANKS! Steve - N9YTY
Actually you had me fooled. I thought there was some issue with the channel drivers. That was a good idea Jim had to send you the diagnostic program. Steve. Steven Palm wrote:
On May 29, 2008, at 8:38 PM, Jim Duuuude wrote:
okay, I have attached a copy of uridiag. Its the program that is used to troubleshoot uri devices.
You know, if anyone tells you that you guys don't suffer fools well, tell them that you do. :)
I haven't taken everything apart to see what I did, but the upshot is that the I seem to have txaudio and auxaudio flipped on the DB9. I don't know if it was on the FOB end or the DB9 end, but since my previous tests with just pumping audio were likely stereo source files it explains why I had audio then but not when going through app_rpt.
With uridiag I received tones on the second channel, not the first, which clued me in.
I REALLY apologize for wasting your time, but this is a good one for the archives. :) When I find time (hopefully this weekend) I will dig into exactly what I wired wrong, I sure thought I had double-checked it all.
I even connected to a few nodes tonight (monitor mode) and it seems to be working great.
Now to read up on how the rest of it really works and get the link up.
MANY THANKS!
Steve - N9YTY _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
participants (3)
-
Jim Duuuude -
Stephen Rodgers -
Steven Palm