Doug, I apologize. nounkeyct=1 is what I have set in my config. I'm assuming that disables the "local" courtesy tone, or possibly anything that isn't explicitly set. In either case, the config I posted is accomplishing my desired functionality. Thanks! On Thu, Jan 29, 2015 at 1:42 PM, Andrew Sylthe <asylthe@kc9ona.com> wrote:
Doug,
http://ohnosec.org/drupal/node/132 - "The linkunkeyct setting selects the courtesy tone to send when a connected remote node unkeys. The default is no courtesy tone when a remote node unkeys."
The courtesy tone sent when a connected remote node unkeys is the tone I DO want to hear.
So in that case, I wouldn't want to set nounkeyct=1 because the documentation states that it will disable all of the courtesy tones which is not what I want.
Thanks!
On Thu, Jan 29, 2015 at 1:06 PM, Doug Crompton <doug@crompton.com> wrote:
I did a little research and checking on this. If you set the tone define to null like:
linkunkeyct=
you will get no tone but you wil get a keyup. If you set:
nounkeyct=1
you will get no tone and no keyup at carrier drop so this is the best way to do it.
nounkeyct=0 is the default on the BBB and the default if it is not defined.
*73 DougWA3DSPhttp://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
------------------------------ Date: Thu, 29 Jan 2015 10:02:41 -0600 From: asylthe@kc9ona.com To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Duplex / Telemetry / Courtesy Tone Question
Thank you to everyone that replied. I believe I do have it figured out now.
Mike, I hear what you're saying regarding the 0,0 tone. My goal was to keep the radio from transmitting altogether. I didn't test it, but I believe your suggestion would have transmitted a silent tone which isn't what I was trying to accomplish.
Steve, I commented out the 'idrecording=' configuration option under my node stanza, and that has effectively disabled the ID. I didn't have to touch anything in the [telemetry] stanza.
So, right now my node is set to duplex=1, there is no ID, and I only hear a courtesy tone when a networked user unkeys.
Here are the pertinent configuration options I set under my node stanza to accomplish this:
duplex=1 ;idrecording=|iKC9ONA/L ; Telemetry & Courtesy Tone Options telemetry=telemetry ;unlinkedct=ct2 ; Sent when not connected to another node ;remotect=ct3 ; Sent when remote base connected linkunkeyct=ct8 ; sent when a network user unkeys nolocallinkct=1 eannmode=2 echolinkdefault=0 echolinkdynamic=0 nounkeyct=1 holdofftelem=1 telemdefault=0 telemdynamic=0 guilinkdefault=0 guilinkdynamic=0 phonelinkdefault=0 phonelinkdynamic=0
Thanks!
On Wed, Jan 28, 2015 at 1:27 PM, Andrew Sylthe <asylthe@kc9ona.com> wrote:
Hello All,
I'm struggling to configure my simplex node in a particular way. As of right now I have duplex=0 specified for my node in rpt.conf. My goal is to maintain the functionality of duplex=0, but do want a courtesy tone to transmit ONLY when a remotely connected AllStar node unkeys. I do not want the simplex node to ID or transmit a courtesy tone for local transmissions. Has anyone else configured their node in such a way? If so, would you be willing to share your configuration.
I've tried setting duplex=1 in rpt.conf along with the following settings with no luck:
; Telemetry & Courtesy Tone Options telemetry=telemetry ;unlinkedct=ct2 ; Sent when not connected to another node remotect=ct3 ; Sent when remote base connected linkunkeyct=ct8 ; sent when a network user unkeys nolocallinkct=1 eannmode=2 echolinkdefault=0 echolinkdynamic=0 nounkeyct=0 holdofftelem=1 telemdefault=0 telemdynamic=0 guilinkdefault=0 guilinkdynamic=0 phonelinkdefault=0 phonelinkdynamic=0
Thank you in advance for anyone that is able to help!
-- Andrew Sylthe KC9ONA
-- Andrew Sylthe KC9ONA
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Andrew Sylthe KC9ONA
-- Andrew Sylthe KC9ONA