Same question, But also: How are you adjusting the audio in the radio? The "normal" two places to inject are the MIC input, the second is the PL input. I can "see" the pot in my head, but don't remember the number off my head for the deviation pot. You might be up against the limiter. Mark KC5EVE At 05:12 AM 8/16/2013, Ross Johnson wrote:
Hey bob Where are you injecting the audio? There should be plenty of headroom. Is the mic still connected?
Ross <http://www.kc7rjk.net>www.kc7rjk.net
From: <mailto:bob@w5evh.org>Bob Roszkowski Sent: Thursday, August 15, 2013 8:12 PM To: <mailto:App_rpt-users@ohnosec.org>App_rpt-users@ohnosec.org Subject: [App_rpt-users] Mastr II and URI low TX audio
I have a Mastr II mobile tuned up in the ham bands. Trying to set the audio levels. RX worked great. Problem with TX audio, I can only get 2KHz deviation max if I set the level to 999 in app_rpt. I am using the URI and have wired it to use the 6db amplifier on board. Anyone else run into this problem?
boB - W5EVH
---------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users