Are other clients supposed to transmit, and do they? -- Tim :wq On Aug 11, 2013, at 8:46 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
I just changed menu 18=0 on both rtcms. I also changed the menu 7 to 3000.
No strange messages on level 3. Standard Hungup 'Zap/pseudo-1855322317'
No TX on client 2 now
On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer@me.com> wrote: Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong.
Are you getting any strange message on the Asterisk console with verbose level 3? -- Tim :wq
On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Very interesting. Playing around with the settings on both RTCMs and found it works with menu 7 set for 600 and menu 18 set for 1.
If I set menu 18 to 0 the non master client, it will not transmit.
Also, I checked my rpt.conf and duplex=2
On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote: This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
Matthew Pitts N8OHU
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help From :Michael Hebert Date :Sun, 11-Aug-2013 21:54 To :Jim Duuuude CC :app_rpt mailing list
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine.
Still no TX on KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com> wrote: well, why dont you try something higher then 480...
Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com> wrote: 1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
Here is my voter.conf
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
Here is my menu 98 on the RTCM
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users