Hmm, it looked like it did. I didn't watch it the whole time. I just did the standard update from the website. cd /usr/src rm -rf astsrc wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv mv trunk astsrc cd astsrc make upgrade-acid and rebooted when it was done. Interesting, It just transmitted the CW for the station ID and I have it announce the top of the hour. Also, just used rpt fun 28304 *81 and it * transmitted* On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote:
This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
Matthew Pitts N8OHU
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help From :Michael Hebert ** Date :Sun, 11-Aug-2013 21:54 To :Jim Duuuude ** CC :app_rpt mailing list **
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine.
Still no TX on KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
well, why dont you try something higher then 480...
------------------------------ Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
------------------------------ Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
*Here is my voter.conf*
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
*Here is my menu 98 on the RTCM *
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Very interesting. Playing around with the settings on both RTCMs and found it works with menu 7 set for 600 and menu 18 set for 1. If I set menu 18 to 0 the non master client, it will not transmit. Also, I checked my rpt.conf and duplex=2 On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote:
This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
Matthew Pitts N8OHU
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help From :Michael Hebert ** Date :Sun, 11-Aug-2013 21:54 To :Jim Duuuude ** CC :app_rpt mailing list **
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine.
Still no TX on KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
well, why dont you try something higher then 480...
------------------------------ Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
------------------------------ Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
*Here is my voter.conf*
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
*Here is my menu 98 on the RTCM *
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong. Are you getting any strange message on the Asterisk console with verbose level 3? -- Tim :wq On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Very interesting. Playing around with the settings on both RTCMs and found it works with menu 7 set for 600 and menu 18 set for 1.
If I set menu 18 to 0 the non master client, it will not transmit.
Also, I checked my rpt.conf and duplex=2
On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote: This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
Matthew Pitts N8OHU
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help From :Michael Hebert Date :Sun, 11-Aug-2013 21:54 To :Jim Duuuude CC :app_rpt mailing list
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine.
Still no TX on KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com> wrote: well, why dont you try something higher then 480...
Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com> wrote: 1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
Here is my voter.conf
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
Here is my menu 98 on the RTCM
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I just changed menu 18=0 on both rtcms. I also changed the menu 7 to 3000. No strange messages on level 3. Standard Hungup 'Zap/pseudo-1855322317' No TX on client 2 now On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong.
Are you getting any strange message on the Asterisk console with verbose level 3? -- Tim :wq
On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Very interesting. Playing around with the settings on both RTCMs and found it works with menu 7 set for 600 and menu 18 set for 1.
If I set menu 18 to 0 the non master client, it will not transmit.
Also, I checked my rpt.conf and duplex=2
On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote:
This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
Matthew Pitts N8OHU
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help From :Michael Hebert ** Date :Sun, 11-Aug-2013 21:54 To :Jim Duuuude ** CC :app_rpt mailing list **
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine.
Still no TX on KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
well, why dont you try something higher then 480...
------------------------------ Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
------------------------------ Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
*Here is my voter.conf*
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
*Here is my menu 98 on the RTCM *
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Are other clients supposed to transmit, and do they? -- Tim :wq On Aug 11, 2013, at 8:46 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
I just changed menu 18=0 on both rtcms. I also changed the menu 7 to 3000.
No strange messages on level 3. Standard Hungup 'Zap/pseudo-1855322317'
No TX on client 2 now
On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer@me.com> wrote: Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong.
Are you getting any strange message on the Asterisk console with verbose level 3? -- Tim :wq
On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Very interesting. Playing around with the settings on both RTCMs and found it works with menu 7 set for 600 and menu 18 set for 1.
If I set menu 18 to 0 the non master client, it will not transmit.
Also, I checked my rpt.conf and duplex=2
On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote: This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
Matthew Pitts N8OHU
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help From :Michael Hebert Date :Sun, 11-Aug-2013 21:54 To :Jim Duuuude CC :app_rpt mailing list
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine.
Still no TX on KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com> wrote: well, why dont you try something higher then 480...
Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com> wrote: 1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
Here is my voter.conf
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
Here is my menu 98 on the RTCM
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Yes, I have 2 clients and the first 1 is transmitting. What is also interesting is client 2 will transmit telemetry. ie CW ID, anything using rpt fun 28304 like COP 4 [28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit On Sun, Aug 11, 2013 at 10:58 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
Are other clients supposed to transmit, and do they? -- Tim :wq
On Aug 11, 2013, at 8:46 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
I just changed menu 18=0 on both rtcms. I also changed the menu 7 to 3000.
No strange messages on level 3. Standard Hungup 'Zap/pseudo-1855322317'
No TX on client 2 now
On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong.
Are you getting any strange message on the Asterisk console with verbose level 3? -- Tim :wq
On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Very interesting. Playing around with the settings on both RTCMs and found it works with menu 7 set for 600 and menu 18 set for 1.
If I set menu 18 to 0 the non master client, it will not transmit.
Also, I checked my rpt.conf and duplex=2
On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote:
This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
Matthew Pitts N8OHU
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help From :Michael Hebert ** Date :Sun, 11-Aug-2013 21:54 To :Jim Duuuude ** CC :app_rpt mailing list **
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine.
Still no TX on KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
well, why dont you try something higher then 480...
------------------------------ Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
------------------------------ Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
*Here is my voter.conf*
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
*Here is my menu 98 on the RTCM *
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
That's weird, so only the master transmits. Hmmmm... what happens when you do *CLI>voter display 28304? Are they both there? You do have different passwords for each client, right? -- Tim :wq On Aug 11, 2013, at 9:11 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Yes, I have 2 clients and the first 1 is transmitting. What is also interesting is client 2 will transmit telemetry. ie CW ID, anything using rpt fun 28304 like COP 4
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 10:58 PM, Tim Sawyer <tim.sawyer@me.com> wrote: Are other clients supposed to transmit, and do they? -- Tim :wq
On Aug 11, 2013, at 8:46 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
I just changed menu 18=0 on both rtcms. I also changed the menu 7 to 3000.
No strange messages on level 3. Standard Hungup 'Zap/pseudo-1855322317'
No TX on client 2 now
On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer@me.com> wrote: Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong.
Are you getting any strange message on the Asterisk console with verbose level 3? -- Tim :wq
On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Very interesting. Playing around with the settings on both RTCMs and found it works with menu 7 set for 600 and menu 18 set for 1.
If I set menu 18 to 0 the non master client, it will not transmit.
Also, I checked my rpt.conf and duplex=2
On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote: This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
Matthew Pitts N8OHU
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help From :Michael Hebert Date :Sun, 11-Aug-2013 21:54 To :Jim Duuuude CC :app_rpt mailing list
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine.
Still no TX on KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com> wrote: well, why dont you try something higher then 480...
Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com> wrote: 1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
Here is my voter.conf
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
Here is my menu 98 on the RTCM
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I know, really weird. If i just change client 2 rtcm menu item 18=0 it will start transmitting and it is still voting. On Sun, Aug 11, 2013 at 11:16 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
That's weird, so only the master transmits. Hmmmm...
what happens when you do *CLI>voter display 28304? Are they both there?
You do have different passwords for each client, right? -- Tim :wq
On Aug 11, 2013, at 9:11 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Yes, I have 2 clients and the first 1 is transmitting. What is also interesting is client 2 will transmit telemetry. ie CW ID, anything using rpt fun 28304 like COP 4
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 10:58 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
Are other clients supposed to transmit, and do they? -- Tim :wq
On Aug 11, 2013, at 8:46 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
I just changed menu 18=0 on both rtcms. I also changed the menu 7 to 3000.
No strange messages on level 3. Standard Hungup 'Zap/pseudo-1855322317'
No TX on client 2 now
On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong.
Are you getting any strange message on the Asterisk console with verbose level 3? -- Tim :wq
On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Very interesting. Playing around with the settings on both RTCMs and found it works with menu 7 set for 600 and menu 18 set for 1.
If I set menu 18 to 0 the non master client, it will not transmit.
Also, I checked my rpt.conf and duplex=2
On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote:
This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
Matthew Pitts N8OHU
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help From :Michael Hebert ** Date :Sun, 11-Aug-2013 21:54 To :Jim Duuuude ** CC :app_rpt mailing list **
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine.
Still no TX on KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
well, why dont you try something higher then 480...
------------------------------ Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
------------------------------ Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
*Here is my voter.conf*
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
*Here is my menu 98 on the RTCM *
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Still need help with this. Anyone ? On Sun, Aug 11, 2013 at 11:16 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
That's weird, so only the master transmits. Hmmmm...
what happens when you do *CLI>voter display 28304? Are they both there?
You do have different passwords for each client, right? -- Tim :wq
On Aug 11, 2013, at 9:11 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Yes, I have 2 clients and the first 1 is transmitting. What is also interesting is client 2 will transmit telemetry. ie CW ID, anything using rpt fun 28304 like COP 4
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 10:58 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
Are other clients supposed to transmit, and do they? -- Tim :wq
On Aug 11, 2013, at 8:46 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
I just changed menu 18=0 on both rtcms. I also changed the menu 7 to 3000.
No strange messages on level 3. Standard Hungup 'Zap/pseudo-1855322317'
No TX on client 2 now
On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong.
Are you getting any strange message on the Asterisk console with verbose level 3? -- Tim :wq
On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Very interesting. Playing around with the settings on both RTCMs and found it works with menu 7 set for 600 and menu 18 set for 1.
If I set menu 18 to 0 the non master client, it will not transmit.
Also, I checked my rpt.conf and duplex=2
On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote:
This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
Matthew Pitts N8OHU
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help From :Michael Hebert ** Date :Sun, 11-Aug-2013 21:54 To :Jim Duuuude ** CC :app_rpt mailing list **
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine.
Still no TX on KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
well, why dont you try something higher then 480...
------------------------------ Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
------------------------------ Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
*Here is my voter.conf*
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
*Here is my menu 98 on the RTCM *
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I was able to help this dude. And thanks, Michael, for sort of indirectly pointing out the necessity for mentioning this: Every time the Voter/RTCM firmware is "upgraded" (well, at least we *hope* so :-) ), there is a possibility that a "new" setting/feature was added that did not exist in the previous version, and, therefore can cause a situation of there being a "rogue" value in a "new" configuration parameter, since it "lives" in configuration "space" that "did not exist" in the previous version. Therefore, the "best practice" for upgrading the Voter/RTCM is to do a "factory initialization" of configuration parameters every time you upgrade. Obviously, you dont *HAVE* to, but if you dont you run the risk of "something weird going on". Remember the new slogan for this -- "When it doubt, zero it out".. :-) Jim WB6NIL Date: Tue, 13 Aug 2013 14:33:59 -0500 From: mhebert1975@gmail.com To: tim.sawyer@me.com CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] RTCM simulcast help Still need help with this. Anyone ? On Sun, Aug 11, 2013 at 11:16 PM, Tim Sawyer <tim.sawyer@me.com> wrote: That's weird, so only the master transmits. Hmmmm... what happens when you do *CLI>voter display 28304? Are they both there? You do have different passwords for each client, right? -- Tim :wq On Aug 11, 2013, at 9:11 PM, Michael Hebert <mhebert1975@gmail.com> wrote: Yes, I have 2 clients and the first 1 is transmitting. What is also interesting is client 2 will transmit telemetry. ie CW ID, anything using rpt fun 28304 like COP 4 [28304] KD5DFB_main=xxx,transmit,masterKD5DFB_site1=xxx,transmit On Sun, Aug 11, 2013 at 10:58 PM, Tim Sawyer <tim.sawyer@me.com> wrote: Are other clients supposed to transmit, and do they? -- Tim :wq On Aug 11, 2013, at 8:46 PM, Michael Hebert <mhebert1975@gmail.com> wrote: I just changed menu 18=0 on both rtcms. I also changed the menu 7 to 3000. No strange messages on level 3. Standard Hungup 'Zap/pseudo-1855322317' No TX on client 2 now On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer@me.com> wrote: Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong. Are you getting any strange message on the Asterisk console with verbose level 3? -- Tim :wq On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975@gmail.com> wrote: Very interesting. Playing around with the settings on both RTCMs and found it works with menu 7 set for 600 and menu 18 set for 1. If I set menu 18 to 0 the non master client, it will not transmit. Also, I checked my rpt.conf and duplex=2 On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote: This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer. Matthew Pitts N8OHU Sent from my Verizon Wireless 4G LTE smartphone -------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help
From :Michael Hebert Date :Sun, 11-Aug-2013 21:54
To :Jim Duuuude CC :app_rpt mailing list Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine. Still no TX on KD5DFB_site1=xxx,transmit On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com> wrote: well, why dont you try something higher then 480... Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org 1) S/W Version: 1.26 08/10/2013 on both of them 2) 480 on both of them On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com> wrote: 1) What version of RTCM firmware are you running? 2) What do you have your TxBufferLength set to (in the RTCM) ? Jim Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help All, I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up I have done a astres.sh and rebooted both RTCMs Here is my voter.conf [general]port = 667buflen = 120password = xxx [28304]KD5DFB_main=xxx,transmit,masterKD5DFB_site1=xxx,transmit Here is my menu 98 on the RTCM GPS Lock: 1 Connected: 1COR: 1EXT CTCSS IN: 0PTT: 0RSSI: 255Current Samples / Sec.: 8000Current Peak Audio Level: 1496Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msecLast Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msecLast Rx Pkt index: 0, inbounds: 0 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
A BIG THANK YOU TO JIM!!! Voted simulcast up and running! On Tue, Aug 13, 2013 at 6:37 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
I was able to help this dude.
And thanks, Michael, for sort of indirectly pointing out the necessity for mentioning this:
Every time the Voter/RTCM firmware is "upgraded" (well, at least we *hope* so :-) ), there is a possibility that a "new" setting/feature was added that did not exist in the previous version, and, therefore can cause a situation of there being a "rogue" value in a "new" configuration parameter, since it "lives" in configuration "space" that "did not exist" in the previous version.
Therefore, the "best practice" for upgrading the Voter/RTCM is to do a "factory initialization" of configuration parameters every time you upgrade. Obviously, you dont *HAVE* to, but if you dont you run the risk of "something weird going on".
Remember the new slogan for this -- "When it doubt, zero it out"..
:-)
Jim WB6NIL
------------------------------ Date: Tue, 13 Aug 2013 14:33:59 -0500 From: mhebert1975@gmail.com To: tim.sawyer@me.com CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] RTCM simulcast help
Still need help with this. Anyone ?
On Sun, Aug 11, 2013 at 11:16 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
That's weird, so only the master transmits. Hmmmm...
what happens when you do *CLI>voter display 28304? Are they both there?
You do have different passwords for each client, right? -- Tim :wq
On Aug 11, 2013, at 9:11 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Yes, I have 2 clients and the first 1 is transmitting. What is also interesting is client 2 will transmit telemetry. ie CW ID, anything using rpt fun 28304 like COP 4
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 10:58 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
Are other clients supposed to transmit, and do they? -- Tim :wq
On Aug 11, 2013, at 8:46 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
I just changed menu 18=0 on both rtcms. I also changed the menu 7 to 3000.
No strange messages on level 3. Standard Hungup 'Zap/pseudo-1855322317'
No TX on client 2 now
On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong.
Are you getting any strange message on the Asterisk console with verbose level 3? -- Tim :wq
On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Very interesting. Playing around with the settings on both RTCMs and found it works with menu 7 set for 600 and menu 18 set for 1.
If I set menu 18 to 0 the non master client, it will not transmit.
Also, I checked my rpt.conf and duplex=2
On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote:
This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
Matthew Pitts N8OHU
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help From :Michael Hebert ** Date :Sun, 11-Aug-2013 21:54 To :Jim Duuuude ** CC :app_rpt mailing list **
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine.
Still no TX on KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
well, why dont you try something higher then 480...
------------------------------ Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
------------------------------ Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
*Here is my voter.conf*
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
*Here is my menu 98 on the RTCM *
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
On 08/13/2013 07:04 PM, Michael Hebert wrote:
A BIG THANK YOU TO JIM!!!
Voted simulcast up and running!
On Tue, Aug 13, 2013 at 6:37 PM, Jim Duuuude <telesistant@hotmail.com <mailto:telesistant@hotmail.com>> wrote:
I was able to help this dude.
Solutions all around! Sounds like progress was made. Now that the problem has been solved, I wanted to ask, Michael, how are you voting? I'm assuming you've got several receiving locations around your area, and the radios that are connected to those Allstar computing devices, are they just receivers with the audio talking back to the main repeater, or actual repeaters listening on one frequency, and re-transmitting back to the main repeater, using Allstar as the voter? Long question. -Geoff
I have a real simple setup right now. Both sites can RX and TX. Of course in voting, ACID is going to use the best RX signal and send that back out to the RTCMs for the TX audio that feeds the repeaters. I am still working on a master clock solution for the transmitters. As of right now at the location I am testing, I am not hearing any heterodyne in the TX audio. Of course this can and will change depending on my location in reference to the sites. Site 1 - master Node running ACID Kenwood TKR-820 repeater RTCM Garmin 18x LVC Site 2 Kenwood TKR-820 repeater RTCM Garmin 18x LVC On Tue, Aug 13, 2013 at 7:17 PM, Geoff <w5omr@att.net> wrote:
On 08/13/2013 07:04 PM, Michael Hebert wrote:
A BIG THANK YOU TO JIM!!!
Voted simulcast up and running!
On Tue, Aug 13, 2013 at 6:37 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
I was able to help this dude.
Solutions all around! Sounds like progress was made.
Now that the problem has been solved, I wanted to ask, Michael, how are you voting? I'm assuming you've got several receiving locations around your area, and the radios that are connected to those Allstar computing devices, are they just receivers with the audio talking back to the main repeater, or actual repeaters listening on one frequency, and re-transmitting back to the main repeater, using Allstar as the voter?
Long question.
-Geoff
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
On 08/11/2013 10:46 PM, Michael Hebert wrote:
I just changed menu 18=0 on both rtcms. I also changed the menu 7 to 3000.
No strange messages on level 3. Standard Hungup 'Zap/pseudo-1855322317'
No TX on client 2 now
On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer@me.com <mailto:tim.sawyer@me.com>> wrote:
Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong.
Are you getting any strange message on the Asterisk console with verbose level 3?
I get more info with calling #> asterisk -Rvvvv Level 4 of verbosity is fairly complete in what it's doing, without 'overwhelming' information using level 5 or 6. (Ugh!) Just my opinion. Your mileage may vary. Use at your own peril. 73 = Best Regards, -Geoff/W5OMR
Geoff, What should I be looking for using Level 4 of verbosity? Mike On Mon, Aug 12, 2013 at 12:53 PM, Geoff <w5omr@att.net> wrote:
On 08/11/2013 10:46 PM, Michael Hebert wrote:
I just changed menu 18=0 on both rtcms. I also changed the menu 7 to 3000.
No strange messages on level 3. Standard Hungup 'Zap/pseudo-1855322317'
No TX on client 2 now
On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2. Leave the TX buffers long - around 2000 or 3000 until you figure out what is wrong.
Are you getting any strange message on the Asterisk console with verbose level 3?
I get more info with calling #> asterisk -Rvvvv Level 4 of verbosity is fairly complete in what it's doing, without 'overwhelming' information using level 5 or 6. (Ugh!)
Just my opinion. Your mileage may vary. Use at your own peril.
73 = Best Regards, -Geoff/W5OMR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (5)
-
Geoff -
Jim Duuuude -
Matthew -
Michael Hebert -
Tim Sawyer