MIke here is a very basic diagram. Sorry Visio is on my work computer not personal. The allstar node in on the mesh network. I have a PBX on the mesh network. The phones on the mesh use 6xxx as the extension range. On the home network I have another PBX both are linked via IAX2 trunk. Home extensions are 5xxx. No internet access for mesh devices except specific ports for those devices that need access link allstarlink, phones ,aprs and a couple others.no encryption allowed period. Access to the home network is permited. no calls permitted to the outside world from the mesh only the ability to ring home extensions. I'm looking at the files now and your last message. Thank you Mike On Sun, Jan 11, 2015 at 12:00 PM, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. what am I missing ? (Mike Lussier) 2. Re: what am I missing ? (mike@midnighteng.com)
----------------------------------------------------------------------
Message: 1 Date: Sun, 11 Jan 2015 10:53:33 -0500 From: Mike Lussier <mike.lussier@gmail.com> To: ALL STAR <app_rpt-users@ohnosec.org> Subject: [App_rpt-users] what am I missing ? Message-ID: < CAJ_8STk1tgh8XuMAqXgtYjrYVtHVCz54o_n_BgSSeG8K1rCWCQ@mail.gmail.com> Content-Type: text/plain; charset="utf-8"
I stepped away from this last night. I was getting frustrated.
What I'm trying to do. dial via DTMF from radio and route the call to the local PBX in my home. I already have a Trunk established between the PBX and the BBB Node. I can place calls directly to the node, TX & RX.
When I initiate a call to the phone from my HT the only response I get back is a courtesy tone.
I have tried all of these combinations.
*6 6001 # *6 6001 6 6001 # 6 6001
There is an IAX2 trunk from the PBX to the BBB AllStar node running 1.2.1.
I can place a call to the node from the phone. I can transmit & receive.
on the BBB node :
I setup my test phone extension 6001 in iax.cnf file on the node the dial command is different dial=iax/6001
[6001] deny=0.0.0.0/0.0.0.0 username=6001 secret=xxxx dtmfmode=rfc2833 canreinvite=no context=radio-control host=dynamic trustrpid=yes sendrpid=no type=peer nat=no port=5060 qualify=yes qualifyfreq=60 transport=udp encryption=no callgroup=RPT pickupgroup=ALL dial=IAX6001 permit=0.0.0.0/0.0.0.0 allow=ulaw,gsm,h263
=======
rpt.conf
6=autopatchup,noct=1,farenddisconnect=1,dialtime= 40000 ; Autopatch up
======= In extensions.conf the phone patch is the [RADIO] context
[radio] exten => _5XXX,1,Dial(iax/${EXTEN},17); ; home phones exten => _6XXX,1,Dial(iax/${EXTEN},17); ; mesh phones
