See if asterisk is decoding any of the touchtones in the cli. “asterisk -vvvvvvvvr” then type the tones and see if anything is happening On Sat, May 4, 2019 at 12:52 PM kc9mnl@gmail.com <kc9mnl@gmail.com> wrote:
Hello all, I am running an Allstar node that is linked directly via 2 URIs to a DMR cbridge using an ambe device in the cbridge to en/decode audio. The node has been operating normal but recently I purchased a new radio, an Anytone D878uv. When I transmit DTMF codes, from the D878, to control the node it won't decode it. When I listen to the talkgroup using another radio the DTMF sounds normal. When I use other radios DTMF is decoded properly. Any suggestions?73, Steve KC9MNL Node #27575 Sorry if this is a duplicate post. I'm having trouble with my phone. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.