Hello all, I am running an Allstar node that is linked directly via 2 URIs to a DMR cbridge using an ambe device in the cbridge to en/decode audio. The node has been operating normal but recently I purchased a new radio, an Anytone D878uv. When I transmit DTMF codes, from the D878, to control the node it won't decode it. When I listen to the talkgroup using another radio the DTMF sounds normal. When I use other radios DTMF is decoded properly. Any suggestions?73, Steve KC9MNL Node #27575 Sorry if this is a duplicate post. I'm having trouble with my phone.
See if asterisk is decoding any of the touchtones in the cli. “asterisk -vvvvvvvvr” then type the tones and see if anything is happening On Sat, May 4, 2019 at 12:52 PM kc9mnl@gmail.com <kc9mnl@gmail.com> wrote:
Hello all, I am running an Allstar node that is linked directly via 2 URIs to a DMR cbridge using an ambe device in the cbridge to en/decode audio. The node has been operating normal but recently I purchased a new radio, an Anytone D878uv. When I transmit DTMF codes, from the D878, to control the node it won't decode it. When I listen to the talkgroup using another radio the DTMF sounds normal. When I use other radios DTMF is decoded properly. Any suggestions?73, Steve KC9MNL Node #27575 Sorry if this is a duplicate post. I'm having trouble with my phone. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Does the D878 generate tones that sound ok on another DMR radio? On Mon, May 6, 2019 at 7:47 AM kc9mnl@gmail.com <kc9mnl@gmail.com> wrote:
It decodes with other radios but not this d878.
-------- Original Message -------- Subject: Re: [App_rpt-users] DTMF issue on DMR From: Skyler F To: Users of Asterisk app_rpt CC:
See if asterisk is decoding any of the touchtones in the cli. “asterisk -vvvvvvvvr” then type the tones and see if anything is happening
On Sat, May 4, 2019 at 12:52 PM kc9mnl@gmail.com <kc9mnl@gmail.com> wrote:
Hello all, I am running an Allstar node that is linked directly via 2 URIs to a DMR cbridge using an ambe device in the cbridge to en/decode audio. The node has been operating normal but recently I purchased a new radio, an Anytone D878uv. When I transmit DTMF codes, from the D878, to control the node it won't decode it. When I listen to the talkgroup using another radio the DTMF sounds normal. When I use other radios DTMF is decoded properly. Any suggestions?73, Steve KC9MNL Node #27575 Sorry if this is a duplicate post. I'm having trouble with my phone. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Never mind sorry didn’t read your whole email. On DMR, (from what I know) I believe DTMF is encoded into a bit stream and then AMBE decides that bit stream back into tones. Maybe the Chinese did something different with their bits that your receiver doesent understand? On Mon, May 6, 2019 at 7:49 AM Skyler F <electricity440@gmail.com> wrote:
Does the D878 generate tones that sound ok on another DMR radio?
On Mon, May 6, 2019 at 7:47 AM kc9mnl@gmail.com <kc9mnl@gmail.com> wrote:
It decodes with other radios but not this d878.
-------- Original Message -------- Subject: Re: [App_rpt-users] DTMF issue on DMR From: Skyler F To: Users of Asterisk app_rpt CC:
See if asterisk is decoding any of the touchtones in the cli. “asterisk -vvvvvvvvr” then type the tones and see if anything is happening
On Sat, May 4, 2019 at 12:52 PM kc9mnl@gmail.com <kc9mnl@gmail.com> wrote:
Hello all, I am running an Allstar node that is linked directly via 2 URIs to a DMR cbridge using an ambe device in the cbridge to en/decode audio. The node has been operating normal but recently I purchased a new radio, an Anytone D878uv. When I transmit DTMF codes, from the D878, to control the node it won't decode it. When I listen to the talkgroup using another radio the DTMF sounds normal. When I use other radios DTMF is decoded properly. Any suggestions?73, Steve KC9MNL Node #27575 Sorry if this is a duplicate post. I'm having trouble with my phone. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (2)
-
kc9mnl＠gmail.com -
Skyler F