On Fri, 17 Oct 2014, Willem Schreuder wrote:
I have a half duplex node with COR and the behavior seems to be that as lng as COR is active, it will not switch to transmit even if there is an incomming transmission on the link.
The behavior I would like to enable is that if there is an incoming signal on the link, it should override the COR and switch to transmit.
The solution provided by K0JSC is to add linktolink=yes in the node stanza in rpt.conf which results in the desired behavior. 73 Willem ================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com