I have a half duplex node with COR and the behavior seems to be that as lng as COR is active, it will not switch to transmit even if there is an incomming transmission on the link. The behavior I would like to enable is that if there is an incoming signal on the link, it should override the COR and switch to transmit. Is there a setting to allow this? 73 Willem ================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com
If COR is active, then it is assumed a user is talking in to your node radio to another station remotely. Please explain why it would be desirable to cut them off mid-sentence and have the node begin transmitting. Why would this be what you wanted to have happen? N5ZUA On 10/17/2014 11:19 PM, Willem Schreuder wrote:
I have a half duplex node with COR and the behavior seems to be that as lng as COR is active, it will not switch to transmit even if there is an incomming transmission on the link.
The behavior I would like to enable is that if there is an incoming signal on the link, it should override the COR and switch to transmit.
Is there a setting to allow this?
73 Willem
================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On Fri, 17 Oct 2014, Steve Agee wrote:
If COR is active, then it is assumed a user is talking in to your node radio to another station remotely. Please explain why it would be desirable to cut them off mid-sentence and have the node begin transmitting. Why would this be what you wanted to have happen?
The radio is operating in SSB, so there is not a reliable detection of the incoming signal. So the idea is to just have the node continuously feed the rx audio into the link (it is a private node), and then you just override it on Tx. 73 Willem ================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com
Only if the node radio is full duplex. 73 Jim W7RY -----Original Message----- From: Willem Schreuder Sent: Friday, October 17, 2014 9:26 PM To: Steve Agee Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Half duplex Tx override On Fri, 17 Oct 2014, Steve Agee wrote:
If COR is active, then it is assumed a user is talking in to your node radio to another station remotely. Please explain why it would be desirable to cut them off mid-sentence and have the node begin transmitting. Why would this be what you wanted to have happen?
The radio is operating in SSB, so there is not a reliable detection of incoming signal. So the idea is to just have the node continuously feed the rx audio into the link (it is a private node), and then you just override it on Tx. 73 Willem ================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Then what you want is to make it a "remote base". That's what a "remote base" is. Jim, WB6NIL
From: jimw7ry@gmail.com To: willem@prinmath.com; n5zua@earthlink.net Date: Fri, 17 Oct 2014 22:03:11 -0700 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Half duplex Tx override
Only if the node radio is full duplex.
73 Jim W7RY
-----Original Message----- From: Willem Schreuder Sent: Friday, October 17, 2014 9:26 PM To: Steve Agee Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Half duplex Tx override
On Fri, 17 Oct 2014, Steve Agee wrote:
If COR is active, then it is assumed a user is talking in to your node radio to another station remotely. Please explain why it would be desirable to cut them off mid-sentence and have the node begin transmitting. Why would this be what you wanted to have happen?
The radio is operating in SSB, so there is not a reliable detection of incoming signal. So the idea is to just have the node continuously feed the rx audio into the link (it is a private node), and then you just override it on Tx.
73 Willem
================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On Fri, 17 Oct 2014, Willem Schreuder wrote:
I have a half duplex node with COR and the behavior seems to be that as lng as COR is active, it will not switch to transmit even if there is an incomming transmission on the link.
The behavior I would like to enable is that if there is an incoming signal on the link, it should override the COR and switch to transmit.
The solution provided by K0JSC is to add linktolink=yes in the node stanza in rpt.conf which results in the desired behavior. 73 Willem ================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com
Maybe you need a voice detecting squelch, as in the Micom radios. I just happen to have designed a board to do that from an old 73 magazine article. If you want details send me an email. The radio I tested it with is a FT-780. It closely follows the Micom squelch method. I built it up to provide "COS" from a HF remote to the app_rpt box. The ham radio market has overlooked this method forever. GeorgeC 2360 George J Csahanin W2DB Cedar Park, TX 512-401-2630 home 401-338-0568 cel -----Original Message----- From: Willem Schreuder Sent: Saturday, October 18, 2014 8:45 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Half duplex Tx override On Fri, 17 Oct 2014, Willem Schreuder wrote:
I have a half duplex node with COR and the behavior seems to be that as lng as COR is active, it will not switch to transmit even if there is an incomming transmission on the link.
The behavior I would like to enable is that if there is an incoming signal on the link, it should override the COR and switch to transmit.
The solution provided by K0JSC is to add linktolink=yes in the node stanza in rpt.conf which results in the desired behavior. 73 Willem ================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com
Is the node set up as a remote base or half duplex "link"? My belief is you need to set up the node as duplex 0 and then set link to link as YES. This will allow the transmit to assert even though it is receiving. I've seen where remote base nodes will not allow transmit as long as it is receiving, negating my view of a definition for remote base. Setting the link to link flag should overcome this. It works for my full duplex links. tnx Mike / W5JR Alpharetta GA
On Oct 18, 2014, at 12:18 PM, "George Csahanin" <george@dyb.com> wrote:
Maybe you need a voice detecting squelch, as in the Micom radios. I just happen to have designed a board to do that from an old 73 magazine article. If you want details send me an email. The radio I tested it with is a FT-780. It closely follows the Micom squelch method. I built it up to provide "COS" from a HF remote to the app_rpt box. The ham radio market has overlooked this method forever.
GeorgeC 2360
George J Csahanin W2DB Cedar Park, TX 512-401-2630 home 401-338-0568 cel -----Original Message----- From: Willem Schreuder Sent: Saturday, October 18, 2014 8:45 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Half duplex Tx override
On Fri, 17 Oct 2014, Willem Schreuder wrote:
I have a half duplex node with COR and the behavior seems to be that as lng as COR is active, it will not switch to transmit even if there is an incomming transmission on the link.
The behavior I would like to enable is that if there is an incoming signal on the link, it should override the COR and switch to transmit.
The solution provided by K0JSC is to add linktolink=yes in the node stanza in rpt.conf which results in the desired behavior.
73 Willem
================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (6)
-
George Csahanin -
Jim -
Jim Duuuude -
Mike/W5JR -
Steve Agee -
Willem Schreuder