On Fri, Sep 16, 2016 at 9:18 AM, Loren Tedford <lorentedford@gmail.com> wrote:
APRS is some thing i would like to learn more about. I still haven't had anyone point me in the right direction on how it would really work with allstarlink.. If one knew i would activate it on my repeater and try it out maybe.. But i think i have to have an aprs compatible radio or some thing..
There are two different things that could be useful: 1. Repeater sends object beacons to the APRS-IS network to indicate its location, frequency, tone, maybe some status telemetry. Like this: http://aprs.fi/#!call=145* 2. Repeater runs igate software, such as Direwolf, so that repeater uses can use PTT-burst APRS transmissions to send their positions through the repeater to the internet. Ideally these would get muted, similarly to how DTMF is muted. Is the purpose of app_gps one of these two things? It looks like app_gps might be designed for mobile Allstar nodes? I must be missing something here. #1 can be done with a simple script and cron. Asterisk does not need to be involved at all. #2 could be done with Direwolf. You would need to mux the receiver audio into Direwolf. Is this possible with the driver used for the URI? I know it would be trivial on a system where alsa is managing the sound devices. An extra $5 sound fob to dedicate to Direwolf might be easier than the software solution. Just some thoughts from someone with more APRS experience than app_rpt experience. Tom KD7LXL