Hi Mohamed, May be you must contact a radio system integrator to avoid issues during deployment. Or change your project by using Kirk DECT/GAP base stations and repeaters to cover all your site and remote link if not too long, and you will see each engineer as a SIP account into your Asterisk. You can contact me of this list if you want discuss more... Best Regards, Francois BERGERET France -----Message d'origine----- De : app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net]De la part de Mohamed A. Gombolaty Envoyé : dimanche 9 septembre 2007 10:58 A : Asterisk Repeater Controler Objet : Re: [App_rpt] Cannot understand Radio requirements Dear All, I haven't had a reply back and I do really need help cause I am still fuzzy about the radio components in this project, anyway it seems to me that after the radio quad do I need to have uhf/vhf remote base to communicate with radio devices or are there other options I need something small and my range will not exceed a kilometer. Thx MAG "Mohamed A. Gombolaty" wrote: Dear All, I am very interested in using the radio option in conjunction with my already created asterisk network, but I have no experience in the radio part nor have I any close idea about. I studied this application requirements and saw the hardware needed they describe a radio quad which uses RJ 45 but I can't see where the RJ goes in order to be able to communicate with the radio devices, I have absolutely no knowledge in two way radio devices so I hope some one could complete the full picture for me behind the radio quad. And what I plan to use this feature is to expand my * PBX network to remote sites and use it to talk to onsite engineers through the two way radio devices using iaxrpt. -- Thx MAG ---------------------------------------------------------------------------- _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt-- Thx MAG