Well, I am not sure what you are using for hardware and what versions of software as you did not say. SO here is my advise for anyone. Make the box work 'headless', meaning without the radios in the setup fray. Use this setting by un/commenting the following lines as shown here in your rpt.cong file so you are using dahdi/pseudo and not radio interfaces. rxchannel = dahdi/pseudo ; No radio (hub) ****************** ; rxchannel = SimpleUSB/usb_29999 ; SimpleUSB ; rxchannel = Pi/1 ; Raspberry Pi PiTA ; rxchannel = Radio/usb_29999 ; USBRadio (DSP) ; rxchannel = Dahdi/1 ; PCI Quad card ; rxchannel = Beagle/1 ; BeagleBoard ; rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP duplex = 2 ; 0 = Half duplex with no telemetry tones or hang time. Then setup iaxrpt to run with that node so you can check it for functionality of a running asterisk install without the radio side of the equation. You will have to read some more of the docs most likely to get this far, but once you do, you are most of the way there. You should be able to 'command' your node with functionality before adding radios to your learning curve. But you will need to ask 'specific questions' to what you do not understand to get help. ...mike/kb8jnm On 6/25/2018 9:38 PM, Dale Day wrote:
Could someone help me with getting allstar link up and running. I just can't allstar configured correctly to the point where I can tune the radios. I just don't understand what I am doing wrong.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.