Hello dear friends! I'm using a PCI Quad Radio card with a Motorola EM400 radio pluged in. I can use a SIP phone to connect to the node (1999) and issue the PTT command (*98) and deactivate it (#). I want to be able to listen to this channel when I dial to the node but when I ask for the Link status (*7), all I receive on the phone and on the remote radio is "node 1999 repeat_only". I tried the duplex=2 option but it didnt work either. Thanks in avance. My rpt.conf: ; ; Your repeater ; [1999] ; Name of First Repeater rxchannel = Zap/1 ; Rx audio/signalling channel ; Note: if you use a unified interface (tx/rx on one channel), only ; specify the rxchannel and the txchannel will be assumed from the rxchannel ;rxnotch=1065,40 ; Notch a particular frequency, depth ; app_rpt must have been compiled with ; the notch option duplex=2 functions=functions ; Repeater Function Table link_functions=link-functions ; Link Function Table phone_functions=functions ; Phone Function table (reverse patch) telemetry=telemetry ; Telemetry descriptions wait_times=wait-times ; Wait times context = radio ; dialing context for phone callerid = "Your Repeater" <6198192562> ; callerid for phone calls idrecording = /etc/asterisk/id ; id recording accountcode=RADIO ; account code (optional) hangtime=100 ; squelch tail hang time (in ms) (optional) totime=180000 ; transmit time-out time (in ms) (optional) idtime=300000 ; id interval time (in ms) (optional) ; The default values for hangtime, time-out time, and id interval time are ; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms) ; respectively politeid=30000 ; time in milliseconds before ID timer ; expires to try and ID in the tail. ; (optional, default is 30000). idtalkover=|iid/r ; Talkover ID (optional) default is none unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none [functions] 1=ilink,1 ; Specific link disconnect 2=ilink,2 ; Specific Link connect - monitor only 3=ilink,3 ; Specific Link connect - transceive 4=ilink,4 ; Enter command mode on a specific link 5=macro,1 ; Command macros (Defined in the macro section) 7=ilink,5 ; Link status 984=ilink,7 ; Last node to key us up 80=status,1 ; System info 81=status,2 ; Time 82=status,3 ; app_rpt.c Version 87=ilink,15 ; Global node query (all nodes in network) 6=autopatchup 0=autopatchdn ; Autopatch down ; Control operator commands 919296=cop,1 ; System warm boot 919297=cop,2 ; System enable 919298=cop,3 ; System disable 99=cop,4 ; Audio test tone 98=cop,6 ; Telephone key PTT [link-functions] 1=ilink,1 ; Specific link disconnect 2=ilink,2 ; Specific Link connect - monitor only 3=ilink,3 ; Specific Link connect - transceive 5=macro,1 ; Command macros (Defined in the macro section) 7=ilink,5 ; Link status 80=status,1 ; System info 81=status,2 ; Time 82=status,3 ; app_rpt.c Version 87=ilink,15 ; Global node query (all nodes in network) 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn ; Autopatch down [nodes] 1999 = radio@127.0.0.1/1999,NONE ; This must be changed to your node number