Right on. Ill check all permissions b4 I copy them. I don't have anything special about my setup so all should work well. Ill work on it a little later. Time for bed. Thanks for the advice and. TTY later with updates. Harold K7ILO From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, July 16, 2018 8:44 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Upgrade from Dial to ASL distro. Check permissions and any special folders you may have created for scripts you are calling along with those files. for starters... I am just checking with you in a step by step. I had a strange incidence but I doubt this is the same as mine so rather than run you on some wild theory... one step at a time. Yes, I did copy my files over to the new debian from acid. It does work. ...mike/kb8jnm On 07/16/2018 11:28 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote: I actually copied them all into the Asterisk folder and then the node became inoperable. From: App_rpt-users <mailto:app_rpt-users-bounces@lists.allstarlink.org> <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, July 16, 2018 7:13 PM To: app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Upgrade from Dial to ASL distro. Did you import "ALL' of your old *.conf files, or just some ? ...mike/kb8jnm On 07/16/2018 10:04 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote: So this has probably already been answered and forgive me if it has. I have a problem with reading through the crap load of emails I have. And I mean a CRAP load. 1st. What's the advantage (differences) to moving to the ASL distro that's posted compared to the DIAL distro? 2nd. Is there an upgrade path from the 1 to the other? 3rd. I do have a hard drive where I installed the ASL version and called myself importing my settings. My node is working well as a standard repeater but I am not registering with the ALLSTAR network and the node is not responding to ANY DTMF commands, including status, id, or any other local commands. It transmits periodically like its id'ing but no sound. My audio is setup because ive used the echo function and that's working properly and audio, deviation and all of the cool repeater settings are clean Where do I need to start looking for these couple of issues? I am back online now because I put the DIAL release hard drive back in just to be accessible for the time being. Thanks all Harold K7ILO _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.