yea!!!!!! And there was much rejoicing!!! Thanks for letting me know. JIM From: kb2ear@kb2ear.net To: telesistant@hotmail.com; dg8ngn@googlemail.com; app_rpt-users@qrvc.com Subject: Re: [App_rpt-users] non-USA-standard repeater offset for freq-agileradios Date: Thu, 25 Mar 2010 23:26:09 -0400 It would appear to work on the TM-271a Thanks, Scott KB2EAR ----- Original Message ----- From: Jim Duuuude To: dg8ngn@googlemail.com ; app_rpt mailing list Sent: Thursday, March 25, 2010 8:06 PM Subject: [App_rpt-users] non-USA-standard repeater offset for freq-agileradios I have added (still experimental) code in app_rpt version 0.211 (available this evening in SVN) to attempt to support non-USA-standard repeater offsets for frequency agile radios. I have tested the code on a TMG-707A, but not on any of the other models supported, which are TM-271, TM-D700, FT-897 and IC-706. The other radios did not seem to support such functionality. There are 2 ways of configuring this: the new rpt.conf parameters (that go into the node clause in rpt.conf), are split2m and split70cm, which specify the default offset for 2 meters and 70 centimeters in kilohertz. split2m = 600 split70cm = 5000 You may also specify the offset in a memory channel by adding an additional parameter before the options, for example: 01 = 147.435,103.5,1035,h-t ; This would be for W6NUT in Los Angeles with input of 146.40 JIM WB6NIL _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users