If you have no URI, you need to set: rxchannel = Zap/pseudo in rpt.conf Ken
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of Jeffrey S. Carrier Sent: Monday, April 09, 2012 4:41 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] New installation trouble...
Don,
I "think" you need to have a URI or some variant connected but I see the same error about twice a week on one of my two boxes. A restart usually takes care of it. I never saw this on the initial installation.
K0JSC
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Don Hackler Sent: Monday, April 09, 2012 2:25 AM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] New installation trouble...
I'm bringing up a new server using the ACID distro. I don't have any radio or URI hardware attached. I haven't done any allstar server/node/password configuration...
As soon as the server reboots after the installation is complete, asterisk keeps restarting.
Each time Asterisk fires up, it bombs out with error 1 and tries to restart. The Asterisk logs complain that Zaptel is configured incorrectly.
/etc/zapata.conf only has this section in it:
[channels] signalling=em_txrx group=9 channel=psuedo
Any ideas?
= = = = = Also, the password setting function in the installation script doesn't seem to work. I had to bust in with grub in single user mode and clear the root password to get into the system at all.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users