I think you would be looking for the remote activity timer because as you said is someone keys up on radio side, the timer resets. One or more of these settings in rpt.conf might help. lnkactenable=0 <<<< I believe this would turn "inactivity timer" off. remote_inact_timeout=1800 <<<<<<<<<<< 30m I think remote_timeout=3600 lnkacttimerwarn=30 Double check those in the manual. But that's how I remember it. ...mike/kb8jnm
On a DIAL AllStar node with EchoLink configured, an incoming Echolink user's transmit is interrupted after twenty seconds on every transmission. A local key-up resets the timer and the remote station's transmission resumes. At the time of disconnect I see this in the verbose asterisk console output every time:
-- <DAHDI/pseudo-960886400> Playing 'rpt/node' (language 'en') -- <DAHDI/pseudo-960886400> Playing 'digits/4' (language 'en') -- <DAHDI/pseudo-960886400> Playing 'digits/2' (language 'en') -- <DAHDI/pseudo-960886400> Playing 'digits/2' (language 'en') -- <DAHDI/pseudo-960886400> Playing 'digits/6' (language 'en') -- <DAHDI/pseudo-960886400> Playing 'digits/9' (language 'en') -- <DAHDI/pseudo-960886400> Playing 'rpt/timeout' (language 'en') -- Hungup 'DAHDI/pseudo-960886400'
We've been unable to locate the setting (if there is one) that would cause DAHDI to play rpt/timeout. Where should we be looking?
Thanks
Larry HB9EYQ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.