Hey bob Where are you injecting the audio? There should be plenty of headroom. Is the mic still connected? Ross www.kc7rjk.net From: Bob Roszkowski Sent: Thursday, August 15, 2013 8:12 PM To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] Mastr II and URI low TX audio I have a Mastr II mobile tuned up in the ham bands. Trying to set the audio levels. RX worked great. Problem with TX audio, I can only get 2KHz deviation max if I set the level to 999 in app_rpt. I am using the URI and have wired it to use the 6db amplifier on board. Anyone else run into this problem? boB - W5EVH -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users