Steve, Simpleusb does not generate tone. You need usbradio to generate tone. 73, Steve N4IRS On 09/28/2016 06:15 PM, Steve Smith wrote:
I am using the RPi2-3 image on a Pi3 and the RB-USB-RIM. I would like to set Channel B to output a PL tone of 110.9 Hz. In SimpleUSB, I have set txmixb=tone. I have set the level to 500. Using an oscilloscope, I see no output from Channel B. Where do I set the frequency and how do I enable it? Tnx Steve N8AR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic