Thanks that will be a start.. But this mean I need to open my sip port to the internet cause my node is not here.. It is at the repeater site.. or I am thinking I could make myself a small asterisk server (without app_rpt) and link that server to my node by IAX?
Date: Tue, 9 Jun 2015 19:25:47 -0400 From: mike@midnighteng.com To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] use of an IP phone to monitor my node
While I know nothing of the individual phone you have and perhaps someone has exact directions for you, I can give some universal notes...
1. Get a manual - probably available online.
2 most ip phones can be config'd via ip address. you should be able to use dhcp till you know what your wanting to do.
3. once you have your phone config'd for your network keep in mind you need to think ahead. issuing a sip id of 5xxx or 6xxx is probably a good starting point. give it a password, as many new types of hacks nowadays.
when you get to this point, and need to config a somewhat matching config to sip.conf in your app_rpt
This should start you out but some phones are unique and may require other parameters to be set.
[5009] ;Portable-1 deny=0.0.0.0/0.0.0.0 username=5009 secret=yourpass dtmfmode=rfc2833 canreinvite=no context=radio-control host=dynamic trustrpid=yes sendrpid=no type=peer nat=no port=5060 qualify=yes qualifyfreq=60 transport=udp encryption=no callgroup=RPT pickupgroup=ALL dial=SIP/5009 mailbox=5009 permit=0.0.0.0/0.0.0.0 callerid=Portable-1 <5009> allow=ulaw,gsm,h263
Hope that helps...
...mike/kb8jnm
I was given an IP phone about 6 months ago.It was left at my friend home after he lost his job cause the company went bancrupt. (he was working from home) they took the laptop but never asked for the phone and router ;-) ) So I took it and it was trying to call home to download its firmware and boot.. So I did a reset, now its waiting to know what do.. The model is a polycom IP335 Would it be possible to program it so that it call my node so that I could remote monitor it.. That of course would be a learning experience about IP phone.. I also have an ATA , a grandstream ht701.. would that also work? Thanks for the time you take to answer my nooby question. Pierre
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.