Thanks for the info. Confirm you must go into command mode to generate the DTMF? I was not using command mode (I don't really understand what it command mode is) so that could be the problem. My config is the same as yours so hopefully it is the lack of 'command mode' that was the problem. I'll try it and see what happens. Tell me more about using the '0' feature instead of a node number. Gary
-----Original Message----- From: app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] On Behalf Of Jim Duuuude Sent: Saturday, October 28, 2006 1:47 PM To: app_rpt@lists.illiana.net Subject: Re: [App_rpt] Passing DTMF?
On my test node (102), I set the following:
duplex = 0 ; No duplex, no response (mostly) propagate_dtmf = yes ; Propigate non-function DTMF digits linktolink = yes
On my normal node (2001), I hit *3102 to bring up a full duplex link to node 102. I then go into command mode for node 102, by entering *40 (since 102 was the last addressed node). Then, whatever touchtones I hit, like 123 comes out the transmitter of node 102 just like it should.