I haven't figured out the entire issue yet - but the remote causes asterisk to die continuously - can I block connections to my node from anything except nodes I want? If so please advise on what config file to modify - TIA ____________ Steven Donegan KK6IVC FCC General Class License SSCC/NORC Life Member, Car #86 www.sscc.us From: Geoff <ars.w5omr@gmail.com> To: app_rpt-users@ohnosec.org Sent: Monday, March 2, 2015 6:45 PM Subject: Re: [App_rpt-users] homebrew USB sound fob no RX audio On 03/02/2015 06:28 PM, Skyler F wrote: I have a question and a possible clue to the issue Question: Would a Dell dimension 8400 with a pentium 4 processer be able to handle two nodes at once? For the most part, the first node will only be connected to the second node and the second node will connect to remote nodes. 29655, 29656 and 29657 are all running here on one box... #~> cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) D CPU 2.80GHz stepping : 7 cpu MHz : 2793.347 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr lahf_lm bogomips : 5586.69 processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) D CPU 2.80GHz stepping : 7 cpu MHz : 2793.347 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr lahf_lm #~>cat /proc/meminfo MemTotal: 1553368 kB MemFree: 988632 kB Buffers: 160608 kB Cached: 294444 kB SwapCached: 0 kB Active: 299444 kB Inactive: 217432 kB HighTotal: 653872 kB HighFree: 286196 kB LowTotal: 899496 kB LowFree: 702436 kB SwapTotal: 1020116 kB SwapFree: 1020116 kB Dirty: 104 kB Writeback: 0 kB AnonPages: 61812 kB Mapped: 18532 kB Slab: 31192 kB PageTables: 1544 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 1796800 kB Committed_AS: 137276 kB VmallocTotal: 114680 kB VmallocUsed: 9636 kB VmallocChunk: 104172 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 Hugepagesize: 4096 kB #~> uptime 20:42:06 up 10 days, 13:29, 1 user, load average: 0.15, 0.17, 0.17 Possible clue to issue So I was in the radio-tune-menu option number four, the CTCSS detection. I first did it on node Number 1 and it worked fine just like always. I then tried it on node number 2 and it didn't work and everything was 0. Then I tried it with node number 1 but the USB devices swapped. Node 1 worked, and node 2 didn't. So there is something wrong where no CTCSS will get detected and it is always 0. Here is my USBRADIO.conf You might want to find another USB buss. Seems to me I recall someone saying that there was sometimes an issue with running two usb sound fobs on the same usb buss, maybe. Sorry to be so vague, but I really don't remember -exactly-, but I -believe- it was along those lines. Your mileage may vary -Geoff/W5OMR _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.