It was so simple, one problem only install kernel sources, without sources you cannot install DAHDI. I found how to install it on Fedora17. http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17322&p=345763 Use 8GB SD card class 10 or better, original Raspi class 4 card is slow. Put to card Fedora remix fc17.r2, it use kernel version 3.2.27. After this install sources as discribed in http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17322&p=345763 Download and install last DAHDI http://downloads.asterisk.org/pub/telephony/dahdi-linux/ and DAHDI tools. Install all packages and development tools for Asterisk compiling. (from Asterisk README file, other shows Menuconfig, if any needed) Download Asterisk from http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk/ Compile and install, it have no any problems. If compiler shows if any package not found, install package and rerun compilation Replace default config files with downloaded from http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk/configs/ Configure you SimpleUSB. I use a CM108 SYBA card http://www.amazon.com/gp/product/B001MSS6CS/ref=oh_details_o00_s00_i00?ie=UT... And it works. But Fedora is not a best system, Debian faster and Debian support Raspi CPU overlock to 1ghz, but I dont know, how to install kernel sources... If any help... Mihhail Jakovlev From: hotmail_97fc649978f54bf0@live.com [mailto:hotmail_97fc649978f54bf0@live.com] On Behalf Of Doug Crompton Sent: Sunday, February 16, 2014 5:19 AM To: Mihhail Jakovlev Cc: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] private nodes with dynamic IP
I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question
Tell us more about that. You might be the first one to get this working that I know of. What did you do to get it going? If you could document what you did and possibly supply an image that would be great. 73 Doug WA3DSP http://www.crompton.com/hamradio ________________________________ From: mihhail.jakovlev@telegrupp.ee<mailto:mihhail.jakovlev@telegrupp.ee> To: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Date: Sat, 15 Feb 2014 22:08:01 +0000 Subject: [App_rpt-users] private nodes with dynamic IP Hi all, I am a new app_rpt user, I have a server with installed ACID, server have static IP. I have 3 assembled RTCM boards configured as voting repeater, it works fine. One RTCM can work as simplex node too. I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question: How I can connect 2 maybe 3 or more) PC based "slave" nodes (endnodes with radio connected) to "master" server, if only "master" server have a static IP, and all endnodes use dynamic? Two nodes in local network with static IP works fine All my nodes a private system(s), not in Allstar network. Master server have static IP, and all endnodes (PC based and RTCMs have dynamic addresses) Thanks! Mihhail Jakovlev ES1BIS _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.