Hi all, I am a new app_rpt user, I have a server with installed ACID, server have static IP. I have 3 assembled RTCM boards configured as voting repeater, it works fine. One RTCM can work as simplex node too. I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question: How I can connect 2 maybe 3 or more) PC based "slave" nodes (endnodes with radio connected) to "master" server, if only "master" server have a static IP, and all endnodes use dynamic? Two nodes in local network with static IP works fine All my nodes a private system(s), not in Allstar network. Master server have static IP, and all endnodes (PC based and RTCMs have dynamic addresses) Thanks! Mihhail Jakovlev ES1BIS
I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question
Tell us more about that. You might be the first one to get this working that I know of. What did you do to get it going? If you could document what you did and possibly supply an image that would be great. 73 Doug WA3DSP http://www.crompton.com/hamradio From: mihhail.jakovlev@telegrupp.ee To: app_rpt-users@ohnosec.org Date: Sat, 15 Feb 2014 22:08:01 +0000 Subject: [App_rpt-users] private nodes with dynamic IP Hi all, I am a new app_rpt user, I have a server with installed ACID, server have static IP. I have 3 assembled RTCM boards configured as voting repeater, it works fine. One RTCM can work as simplex node too. I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question: How I can connect 2 maybe 3 or more) PC based „slave“ nodes (endnodes with radio connected) to „master“ server, if only „master“ server have a static IP, and all endnodes use dynamic? Two nodes in local network with static IP works fine All my nodes a private system(s), not in Allstar network. Master server have static IP, and all endnodes (PC based and RTCMs have dynamic addresses) Thanks! Mihhail Jakovlev ES1BIS _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Just about to setup a single node beaglebone black Got ubuntu 12 loaded now have the fun of getting arm to compile but there are raspbx (ast 11) compiles out there so should not be too bad. Sent from my Verizon Wireless BlackBerry -----Original Message----- From: Doug Crompton <doug@crompton.com> Sender: app_rpt-users-bounces@ohnosec.org Date: Sat, 15 Feb 2014 22:18:48 To: Mihhail Jakovlev<mihhail.jakovlev@telegrupp.ee> Cc: app_rpt-users@ohnosec.org<app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] private nodes with dynamic IP _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
It was so simple, one problem only install kernel sources, without sources you cannot install DAHDI. I found how to install it on Fedora17. http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17322&p=345763 Use 8GB SD card class 10 or better, original Raspi class 4 card is slow. Put to card Fedora remix fc17.r2, it use kernel version 3.2.27. After this install sources as discribed in http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17322&p=345763 Download and install last DAHDI http://downloads.asterisk.org/pub/telephony/dahdi-linux/ and DAHDI tools. Install all packages and development tools for Asterisk compiling. (from Asterisk README file, other shows Menuconfig, if any needed) Download Asterisk from http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk/ Compile and install, it have no any problems. If compiler shows if any package not found, install package and rerun compilation Replace default config files with downloaded from http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk/configs/ Configure you SimpleUSB. I use a CM108 SYBA card http://www.amazon.com/gp/product/B001MSS6CS/ref=oh_details_o00_s00_i00?ie=UT... And it works. But Fedora is not a best system, Debian faster and Debian support Raspi CPU overlock to 1ghz, but I dont know, how to install kernel sources... If any help... Mihhail Jakovlev From: hotmail_97fc649978f54bf0@live.com [mailto:hotmail_97fc649978f54bf0@live.com] On Behalf Of Doug Crompton Sent: Sunday, February 16, 2014 5:19 AM To: Mihhail Jakovlev Cc: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] private nodes with dynamic IP
I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question
Tell us more about that. You might be the first one to get this working that I know of. What did you do to get it going? If you could document what you did and possibly supply an image that would be great. 73 Doug WA3DSP http://www.crompton.com/hamradio ________________________________ From: mihhail.jakovlev@telegrupp.ee<mailto:mihhail.jakovlev@telegrupp.ee> To: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Date: Sat, 15 Feb 2014 22:08:01 +0000 Subject: [App_rpt-users] private nodes with dynamic IP Hi all, I am a new app_rpt user, I have a server with installed ACID, server have static IP. I have 3 assembled RTCM boards configured as voting repeater, it works fine. One RTCM can work as simplex node too. I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question: How I can connect 2 maybe 3 or more) PC based "slave" nodes (endnodes with radio connected) to "master" server, if only "master" server have a static IP, and all endnodes use dynamic? Two nodes in local network with static IP works fine All my nodes a private system(s), not in Allstar network. Master server have static IP, and all endnodes (PC based and RTCMs have dynamic addresses) Thanks! Mihhail Jakovlev ES1BIS _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Mihhail, That is great. Very glad to hear you got this going. I will certainly be trying it. Are you happy with the performance in simpleusb? What is the load average? 73 Doug WA3DSP http://www.crompton.com/hamradio From: mihhail.jakovlev@telegrupp.ee To: doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] private nodes with dynamic IP Date: Sun, 16 Feb 2014 09:45:48 +0000 It was so simple, one problem only install kernel sources, without sources you cannot install DAHDI. I found how to install it on Fedora17. http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17322&p=345763 Use 8GB SD card class 10 or better, original Raspi class 4 card is slow. Put to card Fedora remix fc17.r2, it use kernel version 3.2.27. After this install sources as discribed in http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17322&p=345763 Download and install last DAHDI http://downloads.asterisk.org/pub/telephony/dahdi-linux/ and DAHDI tools. Install all packages and development tools for Asterisk compiling. (from Asterisk README file, other shows Menuconfig, if any needed) Download Asterisk from http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk/ Compile and install, it have no any problems. If compiler shows if any package not found, install package and rerun compilation Replace default config files with downloaded from http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk/configs/ Configure you SimpleUSB. I use a CM108 SYBA card http://www.amazon.com/gp/product/B001MSS6CS/ref=oh_details_o00_s00_i00?ie=UT... And it works. But Fedora is not a best system, Debian faster and Debian support Raspi CPU overlock to 1ghz, but I dont know, how to install kernel sources... If any help... Mihhail Jakovlev From: hotmail_97fc649978f54bf0@live.com [mailto:hotmail_97fc649978f54bf0@live.com] On Behalf Of Doug Crompton Sent: Sunday, February 16, 2014 5:19 AM To: Mihhail Jakovlev Cc: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] private nodes with dynamic IP
I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question
Tell us more about that. You might be the first one to get this working that I know of. What did you do to get it going? If you could document what you did and possibly supply an image that would be great. 73 Doug WA3DSP http://www.crompton.com/hamradio
Seems to me the biggest problem with this would be getting COS from somewhere? No parallel port. Guess you’d have to get the modifiable CM108-based cards and wire for hardware COS? Or am I missing something important? On Feb 16, 2014, at 10:43 AM, Doug Crompton <doug@crompton.com> wrote:
Mihhail,
That is great. Very glad to hear you got this going. I will certainly be trying it. Are you happy with the performance in simpleusb? What is the load average?
73 Doug WA3DSP http://www.crompton.com/hamradio
From: mihhail.jakovlev@telegrupp.ee To: doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] private nodes with dynamic IP Date: Sun, 16 Feb 2014 09:45:48 +0000
It was so simple, one problem only install kernel sources, without sources you cannot install DAHDI. I found how to install it on Fedora17. http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17322&p=345763 Use 8GB SD card class 10 or better, original Raspi class 4 card is slow. Put to card Fedora remix fc17.r2, it use kernel version 3.2.27. After this install sources as discribed in http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17322&p=345763 Download and install last DAHDI http://downloads.asterisk.org/pub/telephony/dahdi-linux/ and DAHDI tools. Install all packages and development tools for Asterisk compiling. (from Asterisk README file, other shows Menuconfig, if any needed) Download Asterisk from http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk/ Compile and install, it have no any problems. If compiler shows if any package not found, install package and rerun compilation Replace default config files with downloaded from http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk/configs/ Configure you SimpleUSB. I use a CM108 SYBA card http://www.amazon.com/gp/product/B001MSS6CS/ref=oh_details_o00_s00_i00?ie=UT... And it works. But Fedora is not a best system, Debian faster and Debian support Raspi CPU overlock to 1ghz, but I dont know, how to install kernel sources... If any help...
Mihhail Jakovlev
From: hotmail_97fc649978f54bf0@live.com [mailto:hotmail_97fc649978f54bf0@live.com] On Behalf Of Doug Crompton Sent: Sunday, February 16, 2014 5:19 AM To: Mihhail Jakovlev Cc: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] private nodes with dynamic IP
I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question
Tell us more about that. You might be the first one to get this working that I know of. What did you do to get it going? If you could document what you did and possibly supply an image that would be great.
73 Doug WA3DSP http://www.crompton.com/hamradio
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
The cheapie FOBs modified or the DMK URI as is work USB. No other ports needed. This is true with any hardware. 73 Doug WA3DSP http://www.crompton.com/hamradio
From: buddy@brannan.name Date: Sun, 16 Feb 2014 11:01:32 -0500 To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] private nodes with dynamic IP
Seems to me the biggest problem with this would be getting COS from somewhere? No parallel port. Guess you’d have to get the modifiable CM108-based cards and wire for hardware COS? Or am I missing something important? On Feb 16, 2014, at 10:43 AM, Doug Crompton <doug@crompton.com> wrote:
Mihhail,
That is great. Very glad to hear you got this going. I will certainly be trying it. Are you happy with the performance in simpleusb? What is the load average?
73 Doug WA3DSP http://www.crompton.com/hamradio
From: mihhail.jakovlev@telegrupp.ee To: doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] private nodes with dynamic IP Date: Sun, 16 Feb 2014 09:45:48 +0000
It was so simple, one problem only install kernel sources, without sources you cannot install DAHDI. I found how to install it on Fedora17. http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17322&p=345763 Use 8GB SD card class 10 or better, original Raspi class 4 card is slow. Put to card Fedora remix fc17.r2, it use kernel version 3.2.27. After this install sources as discribed in http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17322&p=345763 Download and install last DAHDI http://downloads.asterisk.org/pub/telephony/dahdi-linux/ and DAHDI tools. Install all packages and development tools for Asterisk compiling. (from Asterisk README file, other shows Menuconfig, if any needed) Download Asterisk from http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk/ Compile and install, it have no any problems. If compiler shows if any package not found, install package and rerun compilation Replace default config files with downloaded from http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk/configs/ Configure you SimpleUSB. I use a CM108 SYBA card http://www.amazon.com/gp/product/B001MSS6CS/ref=oh_details_o00_s00_i00?ie=UT... And it works. But Fedora is not a best system, Debian faster and Debian support Raspi CPU overlock to 1ghz, but I dont know, how to install kernel sources... If any help...
Mihhail Jakovlev
From: hotmail_97fc649978f54bf0@live.com [mailto:hotmail_97fc649978f54bf0@live.com] On Behalf Of Doug Crompton Sent: Sunday, February 16, 2014 5:19 AM To: Mihhail Jakovlev Cc: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] private nodes with dynamic IP
I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question
Tell us more about that. You might be the first one to get this working that I know of. What did you do to get it going? If you could document what you did and possibly supply an image that would be great.
73 Doug WA3DSP http://www.crompton.com/hamradio
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Mihhail, I forgot to mention. Debian is a problem with the older Asterisk code which app_rpt requires. Since you used Fedora you overcame that problem. The overclocking is a hardware issue. Perhaps there is a Fedora/Pi forum where you can ask that question. 73 Doug WA3DSP http://www.crompton.com/hamradio From: mihhail.jakovlev@telegrupp.ee To: doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] private nodes with dynamic IP Date: Sun, 16 Feb 2014 09:45:48 +0000 It was so simple, one problem only install kernel sources, without sources you cannot install DAHDI. I found how to install it on Fedora17. http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17322&p=345763 Use 8GB SD card class 10 or better, original Raspi class 4 card is slow. Put to card Fedora remix fc17.r2, it use kernel version 3.2.27. After this install sources as discribed in http://www.raspberrypi.org/phpBB3/viewtopic.php?t=17322&p=345763 Download and install last DAHDI http://downloads.asterisk.org/pub/telephony/dahdi-linux/ and DAHDI tools. Install all packages and development tools for Asterisk compiling. (from Asterisk README file, other shows Menuconfig, if any needed) Download Asterisk from http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk/ Compile and install, it have no any problems. If compiler shows if any package not found, install package and rerun compilation Replace default config files with downloaded from http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk/configs/ Configure you SimpleUSB. I use a CM108 SYBA card http://www.amazon.com/gp/product/B001MSS6CS/ref=oh_details_o00_s00_i00?ie=UT... And it works. But Fedora is not a best system, Debian faster and Debian support Raspi CPU overlock to 1ghz, but I dont know, how to install kernel sources... If any help... Mihhail Jakovlev From: hotmail_97fc649978f54bf0@live.com [mailto:hotmail_97fc649978f54bf0@live.com] On Behalf Of Doug Crompton Sent: Sunday, February 16, 2014 5:19 AM To: Mihhail Jakovlev Cc: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] private nodes with dynamic IP
I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question
Tell us more about that. You might be the first one to get this working that I know of. What did you do to get it going? If you could document what you did and possibly supply an image that would be great. 73 Doug WA3DSP http://www.crompton.com/hamradio From: mihhail.jakovlev@telegrupp.ee To: app_rpt-users@ohnosec.org Date: Sat, 15 Feb 2014 22:08:01 +0000 Subject: [App_rpt-users] private nodes with dynamic IP Hi all, I am a new app_rpt user, I have a server with installed ACID, server have static IP. I have 3 assembled RTCM boards configured as voting repeater, it works fine. One RTCM can work as simplex node too. I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question: How I can connect 2 maybe 3 or more) PC based „slave“ nodes (endnodes with radio connected) to „master“ server, if only „master“ server have a static IP, and all endnodes use dynamic? Two nodes in local network with static IP works fine All my nodes a private system(s), not in Allstar network. Master server have static IP, and all endnodes (PC based and RTCMs have dynamic addresses) Thanks! Mihhail Jakovlev ES1BIS _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Put the static IP address for the central node in the remote rpt.conf’s they all call themselves 127.0.0.1. Have them all initiate connections to the central node. I think that should work. I don’t think the central node needs the remote IP addresses if it isn’t calling to them. I think. I have to try that some time. _____5 minutes later_____ OK, I tried this on my remote node. The “central node” has an incorrect IP address for the remote node. The remote node has the correct IP address for the central node in its rpt.conf file. I commanded the remote node to connect to the central node, worked fine. That scheme should work for you. Assume 1999 is central node and 1998 is remote. In central 1999 rpt.conf: 1998 = radio@192.168.xxx.yyy:4569/1998,NONE Then in remote 1998 rpt.conf: 1999 = radio@rea.lip.add.res:4569/1999,NONE “rpt reload” on each end and it should work. GeorgeC W2DB 2360 From: Mihhail Jakovlev Sent: Saturday, February 15, 2014 4:08 PM To: mailto:app_rpt-users@ohnosec.org Subject: [App_rpt-users] private nodes with dynamic IP Hi all, I am a new app_rpt user, I have a server with installed ACID, server have static IP. I have 3 assembled RTCM boards configured as voting repeater, it works fine. One RTCM can work as simplex node too. I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question: How I can connect 2 maybe 3 or more) PC based „slave“ nodes (endnodes with radio connected) to „master“ server, if only „master“ server have a static IP, and all endnodes use dynamic? Two nodes in local network with static IP works fine All my nodes a private system(s), not in Allstar network. Master server have static IP, and all endnodes (PC based and RTCMs have dynamic addresses) Thanks! Mihhail Jakovlev ES1BIS
Thanks, I try it soon and see what relult is Mihhail Jakovlev From: George Csahanin [mailto:george@dyb.com] Sent: Sunday, February 16, 2014 7:23 AM To: Mihhail Jakovlev; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] private nodes with dynamic IP Put the static IP address for the central node in the remote rpt.conf’s they all call themselves 127.0.0.1. Have them all initiate connections to the central node. I think that should work. I don’t think the central node needs the remote IP addresses if it isn’t calling to them. I think. I have to try that some time. _____5 minutes later_____ OK, I tried this on my remote node. The “central node” has an incorrect IP address for the remote node. The remote node has the correct IP address for the central node in its rpt.conf file. I commanded the remote node to connect to the central node, worked fine. That scheme should work for you. Assume 1999 is central node and 1998 is remote. In central 1999 rpt.conf: 1998 = radio@192.168.xxx.yyy:4569/1998,NONE<mailto:radio@192.168.xxx.yyy:4569/1998,NONE> Then in remote 1998 rpt.conf: 1999 = radio@rea.lip.add.res:4569/1999,NONE<mailto:radio@rea.lip.add.res:4569/1999,NONE> “rpt reload” on each end and it should work. GeorgeC W2DB 2360 From: Mihhail Jakovlev<mailto:mihhail.jakovlev@telegrupp.ee> Sent: Saturday, February 15, 2014 4:08 PM To: mailto:app_rpt-users@ohnosec.org Subject: [App_rpt-users] private nodes with dynamic IP Hi all, I am a new app_rpt user, I have a server with installed ACID, server have static IP. I have 3 assembled RTCM boards configured as voting repeater, it works fine. One RTCM can work as simplex node too. I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question: How I can connect 2 maybe 3 or more) PC based „slave“ nodes (endnodes with radio connected) to „master“ server, if only „master“ server have a static IP, and all endnodes use dynamic? Two nodes in local network with static IP works fine All my nodes a private system(s), not in Allstar network. Master server have static IP, and all endnodes (PC based and RTCMs have dynamic addresses) Thanks! Mihhail Jakovlev ES1BIS
But if i create „virtual“ local node 2198 in central server and in remote node 1998 create a startup macro *32198, I have automatic permanent connection between 1998 and 2198. And if I call from any other node to 1998, I have connection established? (central server know, where is 1998, because it is connected to local node 2198). Tervitades, Mihhail Jakovlev From: George Csahanin [mailto:george@dyb.com] Sent: Sunday, February 16, 2014 7:23 AM To: Mihhail Jakovlev; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] private nodes with dynamic IP Put the static IP address for the central node in the remote rpt.conf’s they all call themselves 127.0.0.1. Have them all initiate connections to the central node. I think that should work. I don’t think the central node needs the remote IP addresses if it isn’t calling to them. I think. I have to try that some time. _____5 minutes later_____ OK, I tried this on my remote node. The “central node” has an incorrect IP address for the remote node. The remote node has the correct IP address for the central node in its rpt.conf file. I commanded the remote node to connect to the central node, worked fine. That scheme should work for you. Assume 1999 is central node and 1998 is remote. In central 1999 rpt.conf: 1998 = radio@192.168.xxx.yyy:4569/1998,NONE<mailto:radio@192.168.xxx.yyy:4569/1998,NONE> Then in remote 1998 rpt.conf: 1999 = radio@rea.lip.add.res:4569/1999,NONE<mailto:radio@rea.lip.add.res:4569/1999,NONE> “rpt reload” on each end and it should work. GeorgeC W2DB 2360 From: Mihhail Jakovlev<mailto:mihhail.jakovlev@telegrupp.ee> Sent: Saturday, February 15, 2014 4:08 PM To: mailto:app_rpt-users@ohnosec.org Subject: [App_rpt-users] private nodes with dynamic IP Hi all, I am a new app_rpt user, I have a server with installed ACID, server have static IP. I have 3 assembled RTCM boards configured as voting repeater, it works fine. One RTCM can work as simplex node too. I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question: How I can connect 2 maybe 3 or more) PC based „slave“ nodes (endnodes with radio connected) to „master“ server, if only „master“ server have a static IP, and all endnodes use dynamic? Two nodes in local network with static IP works fine All my nodes a private system(s), not in Allstar network. Master server have static IP, and all endnodes (PC based and RTCMs have dynamic addresses) Thanks! Mihhail Jakovlev ES1BIS
participants (5)
-
Buddy Brannan -
Doug Crompton -
George Csahanin -
Mihhail Jakovlev -
shulerburton＠gmail.com