Sounds like a lousy anti-aliasing LPF. Loose tolerance, poor design, maybe both..... On Wed, May 4, 2016 at 8:43 PM, Skyler F <electricity440@gmail.com> wrote:
I figured out the problem : Even though I was hooking my audio directly into the mic input of the CM108 chip, a low pass filter was clamping all the high frequency signals to ground, I just had to desolder an L5 as this link shows:
I was looking at other guides, which had sound fobs with no low pass filter already in it.
kdw0hb
On Tue, May 3, 2016 at 8:34 AM, Skyler F <electricity440@gmail.com> wrote:
I just put together a modified sound fob by taking a 10µF capacitor to the divider of 47k and 68k resistors and then to the microphone input of the sound fob, but I am getting the lack of high frequency noise error when I plug my fob into the radio. A DMK URI works fine. Has anybody else had problems with these sound fobs?
73 kd0whb
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- KJ6QFS Sam Skolfield