Marty, Yes, that's correct. For simpleusb and usbradio, you must use a URI type device which has a C-Media CM108 or CM119 family chip. 73, David KB4FXC On Sun, 21 Oct 2018, Martin Boroff wrote:
David
If I interpret this correctly, I should be using an interface like the URI device for my radio interface. Is that correct? Maybe I should go back to John Kruk the Yeasu rep and get his hardware configuration. He did tell me he interface an FTM400XD. He just isnât very responsive. 73, Marty WD9GYM
On Oct 21, 2018, at 1:55 PM, David McGough <kb4fxc@inttek.net> wrote:
Marty,
simpleusb and usbradio only work with CM108/CM119 compatible sound cards. These drivers don't support the TI PCM2912 chipset, as seen in your earlier screenshot.
Note that COS/PTT must be attached to specific pins on the CMxyz sound device for signaling to work.
There is lots of documentation out there about how the CMxyz device is attached to the radio. There are many compatible commercial boards available, including the DMK URIx, Masters Communications RA35/RA40, Repeater Builder USB-RIM, etc.
You can also build your own and many other alternative CMxyz adapters have been designed/built by other hams and are available, too. Here is a link to one of many examples of building an interface:
https://www.hamvoip.org/hamradio/usb_fob_modification/
73, David KB4FXC
On Sun, 21 Oct 2018, Martin Boroff wrote:
Mike
I think the problem is in the pi.
I thought I may have tried to define usbradio but I am not 100% sure. I will attach the conf files with my codename on them. IâÂÂm not sure what you mean by which file I use. Where would I look to see which one I use.
The radio is a Ten Ten Patriot usb transceiver I am using for testing. It connects with a Ten Ten USB sound card and has leads for ground, mic, audio out and PTT. I plan to later connect a Yeasu FTM100DR which I hope to operate remotely.
73, Marty
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.