yup I did in early test, and it did not seam to fix it.. Now I did change it and relaoded the settings un the asterisk cli and it did made a BIG change.. strange.. did I forgot to reload the first time? maybe.. thanks again for the help From: wb3awj@comcast.net To: petem001@hotmail.com Subject: Re: [App_rpt-users] High pitch audio Date: Fri, 15 May 2015 03:22:50 +0300 Did you try txlimonly=yes ? -- Bob Poff Loganville, Pa Thursday, 14 May 2015, 06:37PM -04:00 from pete M <petem001@hotmail.com>: Got 2 repeater linked together at the same site One msf5000 UHF one tkr750 VHF If I listen to the UHF repeater the audio is nice and have low and high sound (in the limit of 3hz of course) No mather if the receiving repeater is the VHF or UHF. I even asked a friend to switch from VHF to UHF on his radio and I could not detect wich was the source beside from the courtasy tone and the end if his TX. But on the VHF side the audio is High pitch no bass.. here is my config in usbsound.conf for the TKR750 [usb28739] ; VHF hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=103.5 rxctcssfreqs=103.5 txctcssfreqs=103.5 ;rxctcssoverride=0 carrierfrom=usbinvert ctcssfrom=dsp rxdemod=flat txprelim=no txlimonly=no txtoctype=notone txmixa=voice txmixb=tone invertptt=0 duplex=1 rxondelay=1 rxnoisefiltype=0 eeprom=0 Is there a something obvious that I miss? Thanks.. Pierre _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.