Tim was referring to GPIO on the CM1xx. That being said, Mike and I are starting to talk about GPIO on the RPi2 73, Steve N4IRS On 10/30/2015 12:08 PM, K Yoksh wrote:
I'm looking forward to using my Pi nodes with GPIO for PTT/COS, but I thought GPIO wasn't supported until the next release?
73
Kyle K0KN Olathe, KS
--- Original Message ---
Date: Thu, 29 Oct 2015 10:25:28 -0700 From: Tim Sawyer <tisawyer at gmail.com <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> To: Steve N4IRS <szingman at msgstor.com <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> Cc: "app_rpt-users at ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>" <app_rpt-users at ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> Subject: Re: [App_rpt-users] DIAL simpleusb Message-ID: <CAG3ht9uW80TNGu9BGZghqGg3FozagJ_dmrwJFA3Ygo5XjzmhAg at mail.gmail.com <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> Content-Type: text/plain; charset="utf-8"
Working fine including GPIO.
On Thursday, October 29, 2015, Steve N4IRS <szingman at msgstor.com <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> wrote:
/Yes, />/No errors reported. />//>/> Has anyone tested the simpleusb driver with the RPi2 version of DIAL? />//>/-- /
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.