Chuck, was that on one of the beagle boards? George J Csahanin W2DB Cedar Park, TX 512-401-2630 home 401-338-0568 cel From: Chuck Kraly Sent: Thursday, October 30, 2014 9:38 PM To: Bob Cc: George Csahanin ; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] questions on beagle I ran usbradio on a GTX (no cor line available) and it worked fine. And yes usbradio decodes PL fine. On Thu, Oct 30, 2014 at 7:36 PM, Bob <kk6ecm@gmail.com> wrote: Beagleboard XM comes with beagle.conf, which is simpleusb like... e.g. no DSP, relying on hardware PL decode. I don’t know if you can use usbradio.conf for DSP for a PL decode. Thanks, Bob kk6ecm ------------------------------------------------------------------------------ From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of George Csahanin Sent: Thursday, October 30, 2014 5:55 PM To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] questions on beagle Folks, will current distros of pickle, or whatever we use on the beagle boards run DSP for PL decode or noise squelch? I have a BeagleBoard XM and a BBB, about three months back version. I’d love to tuck one of these inside a Nokia BSR-450 repeater eliminating its squelch and PL encode/decode (well, it doesn’t have those)??? Thanks GeorgeC George J Csahanin W2DB 2360 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Chuck K0XM Backyard Repeater Group k0xm@byrg.net