Mark, Do you have a duplex radio(s) connected? Is the COS connected from the receiver to the URI? Does the receiver hold the COS line low when not receiving a signal? With carrierfrom=usb the URI sees either either a disconnected receiver or COS high signal as the receiver is receiving a signal. This would key the transmitter in a duplex configuration. Yes, chan_usbradio IS supported. I don't remember carrierfrom=dsp in simpleusb.conf 73, Steve N4IRS On 10/06/2015 01:08 AM, Mark Johnston wrote:
First off, great work on the new DIAL to replace ACID...
A couple issues I have been having, one after a reboot of the computer - rare I know but always good to test, the transmitter keys up for some odd reason, in duplex=2
Second issue, /var/lib/asterisk/rpt_extnodes does not show my node 28344... I have it setup on port 4570 and fwd setup correctly - manually setup in rpt.conf the IP/port to my other test server on ACID - and can connect, but can't connect to/from any other nodes.
anyone have an idea what could be going on here? Why does it key up til the timeout time runs out and why is my node not showing up in the rpt_extnodes?
Also is usbradio still supported? Does simpleusb have new features? I ask because the simpleusb.conf originally had 'carrier from=dsp' just thought maybe it supports PL decode or something?
simpleusb.conf
[general]
[usb28344]
hdwtype=0
rxboost=1
txboost=1
carrierfrom=usb
ctcssfrom=usb
txmixa=voice
txmixb=no
invertptt=0
duplex=1
rxondelay=0
eeprom=0
simpleusb_tune....
[usb28344]
; name=usb28344
; devicenum=1
devstr=3-2:1.0
rxmixerset=500
txmixaset=100
txmixbset=100
rpt.conf
[28344] ; Change this to your assigned node number
rxchannel=Simpleusb/usb28344
duplex=2
erxgain=-3
etxgain=3
;controlstates=controlstates
scheduler=schedule28344
morse=morse28344
macro=macro28344
functions=functions28344
phone_functions=functions28344
link_functions=functions28344
telemetry=telemetry
wait_times=wait-times
context = radio
callerid = "Repeater" <0000000000>
idrecording = |iKC7DMF
accountcode=RADIO
hangtime=100
althangtime=100
totime=170000
idtime=540000
politeid=3000
73's
Mark KC7DMF
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic