Dave, If I am reading you correctly, you are describing that possibly the rf generated by your Pi/PC and/or courtesy tones are breaking the receiver squelch for a repetitive loop ? If i'm off base, please better describe the problem, then tell us what hardware you are using and if a repeater, simplex node etc. ...mike/kb8jnm On 3/6/2019 1:32 AM, David Wilcox wrote:
Help Please
I'm using a handset radio to control a remote repeater the problem I'm having is when the handset releases it hears the output from the repeater and goes in to
Transmit release and transmit cycle that won't stop, is there a setting in the rpt.conf that would cure this
Thanks for any help
Dave
Kd9bvf
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.