Gary, We have some functionality for this when operating a node as a bridge to a legacy RF-linked system. (We do this on the Calnet node) There are settings to faclitate this in rpt.conf: propagate_dtmf linktolink notelemtx inxlat outxlat They're not documented in the rpt. conf file yet, so you'll have to look at the app_rpt.c source file to figure out how to use them. The problem comes when you want to pass * and #. Since these mean something to the app_rpt command decoder, they need to be escaped with a 2 digit sequence. When you enable command passthrough on a node acting as a bridge, * traditionally becomes *7, and # becomes *0. This is true for all app_rpt commands directed at that node as well. This is what the inxlat and outxlat are used for. Steve On Thursday 26 October 2006 18:55, Gary wrote:
Is there a way to open up a Link Port or Remote Base port to pass DTMF Audio?
Gary
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt