Mike, The phonepatch has a dialtime detting - dialtime The maximum time to wait between DTMF digits when a telephone number is being dialed. The patch will automatically disconnect if this time is exceeded. The value is specified in milliseconds. I am confused what you are wanting to do. You mentioned iaxrpt - that has nothing to do with phone patch it has built-in and apparently unchangeable digit sending timing which is fairly short but that is interdigit timing. If you send a long string it will pass it. If you want to send a long string why not automate it so it sends fast. 73 Doug WA3DSP http://www.crompton.com/hamradio From: mike@midnighteng.com To: app_rpt-users@ohnosec.org Date: Wed, 19 Feb 2014 11:40:48 -0700 Subject: Re: [App_rpt-users] Phone Patch DTMF Time to Dial ? Well, Thanks for that but "I wonder if the parameters are in milliseconds or seconds"? Problem is from using iaxRPT to test what I was doing. It sends a string after a completed dtmf entry. Before I could finish entering the string in iaxRPT -autopach dialtime was timing out from the lack of 1st digit not yet received because the program is sending it as iax data in a string. I don't have it in front of me know but it might change things if I were not sending it as iax through the program as a direct entry but engaging the tx and sending. I'll try that one tonight. I guess it's dependant on the iaxRPT program. It's not a problem on radio side. ...mike/kb8jnm -------- Original Message -------- Subject: Re: [App_rpt-users] Phone Patch DTMF Time to Dial ? From: Andrew Sylthe <asylthe@kc9ona.com> Date: Wed, February 19, 2014 12:43 pm To: "mike@midnighteng.com" <mike@midnighteng.com> Cc: app_rpt-users@ohnosec.org Hello Mike, I found the following app_rpt Autopatch howto:http://ohnosec.org/drupal/node/63 There appears to be a dialtime= setting that allows you to specify time allowed between DTMF digits. I'm not sure if that's what you're looking for or not. I would have to see your asterisk dialplan / configuration to help diagnose further. On Wed, Feb 19, 2014 at 9:15 AM, <mike@midnighteng.com> wrote: Hello All, I am looking for the timer/setting for the length of time I have to enter a DTMF string while conducting a phone patch. I keep getting cut off because of the pre-dial string I have selecting the external PBX and trunk of the outgoing line (many digits total). It seems to be less than 4 seconds. Got any experience with this one? ...mike/kb8jnm _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Andrew Sylthe KC9ONA _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.