Hmm, it looked like it did. I didn't watch it the whole time. I just did the standard update from the website. cd /usr/src rm -rf astsrc wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv mv trunk astsrc cd astsrc make upgrade-acid and rebooted when it was done. Interesting, It just transmitted the CW for the station ID and I have it announce the top of the hour. Also, just used rpt fun 28304 *81 and it * transmitted* On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote:
This might sound like an odd question, but did chan_voter compile cleanly for you? I just grabbed the latest svn code and it did not compile for me at all. The error it gave me I would need to check tomorrow, as I'm currently not at the computer.
Matthew Pitts N8OHU
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original Message -------- Subject:Re: [App_rpt-users] RTCM simulcast help From :Michael Hebert ** Date :Sun, 11-Aug-2013 21:54 To :Jim Duuuude ** CC :app_rpt mailing list **
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine.
Still no TX on KD5DFB_site1=xxx,transmit
On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
well, why dont you try something higher then 480...
------------------------------ Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
------------------------------ Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
*Here is my voter.conf*
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
*Here is my menu 98 on the RTCM *
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users