In your /etc/asterisk/rpt.conf file the line that reads .... totime=450000 ; transmit time-out time (in ms) (optional) N5ZUA On 2/2/2016 5:44 PM, Larry da Ponte wrote:
On a DIAL AllStar node with EchoLink configured, an incoming Echolink user's transmit is interrupted after twenty seconds on every transmission. A local key-up resets the timer and the remote station's transmission resumes. At the time of disconnect I see this in the verbose asterisk console output every time:
-- <DAHDI/pseudo-960886400> Playing 'rpt/node' (language 'en') -- <DAHDI/pseudo-960886400> Playing 'digits/4' (language 'en') -- <DAHDI/pseudo-960886400> Playing 'digits/2' (language 'en') -- <DAHDI/pseudo-960886400> Playing 'digits/2' (language 'en') -- <DAHDI/pseudo-960886400> Playing 'digits/6' (language 'en') -- <DAHDI/pseudo-960886400> Playing 'digits/9' (language 'en') -- <DAHDI/pseudo-960886400> Playing 'rpt/timeout' (language 'en') -- Hungup 'DAHDI/pseudo-960886400'
We've been unable to locate the setting (if there is one) that would cause DAHDI to play rpt/timeout. Where should we be looking?
Thanks
Larry HB9EYQ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.