That is true but I think he is asking about usbradio. On the BBB I highly recommend simpleusb and that is the default setup mode. In general I would recommend simpleusb for Allstar on all platforms unless there is something you absolutely need on usbradio. The dsp code can and does often cause audio distortion depending on what system you are running it on. I have often seen the problem on PC's as well as small board computers. Unfortunately the default for the Acid release is usbradio and I have helped quite a few Acid users switch to simpleusb with greatly improved audio. So until the usbradio code gets updated I would stick with simpleusb. 73 Doug WA3DSP http://www.crompton.com/hamradio
From: mike@midnighteng.com To: app_rpt-users@ohnosec.org Date: Wed, 14 Jan 2015 09:03:35 -0700 Subject: Re: [App_rpt-users] Allstarlink (app_rpt) with low power PC's?
Well,
Doug - WA3DSP put the time into a well documented version for the BeagleBoneBlack BBB
It can be found at http://hamvoip.org/BBB/BBB_Allstar_v1.2.1.zip
http://crompton.com/hamradio/BeagleBoneBlackAllstar/
Many of these are in use now.
...mike/kb8jnm
-------- Original Message -------- Subject: [App_rpt-users] Allstarlink (app_rpt) with low power PC's? From: Thomas Delmonego <delmonego@hotmail.de> Date: Wed, January 14, 2015 8:45 am To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Hi all,
have anyone realised an efficient Allstarlink-System with CTCSS and COR elaborated by DSP (using configuration in "usbradio.conf") using low power computers such Odroid, Banana Pi, Cubieboard, Wandboard or similars?
If reply is yes (yahoo!), is there available an ISO file for used memory (compact flash, micro SD etc.) ?
73! Thomas, IW3AMQ<hr>_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.