Just guessing here, I think you may need to set-up a simpleusb/radiousb port and define COS even though one will not be connected. Perhaps you have done that. But if the COS logic is inverted from truth, it will indeed tx & time-out. I don't know if there is some default logic for that but I have never set-up a hub without the ability to plug-in a usb fob and test it on the fly using parallel port definitions to keep the COS logic correct for the hub/port/node. Someone may have a better answer than mine. But the root seems to be COS signal. ...mike/kb8jnm
Question all,
What would cause a HUB setup with no USB radio hardware hooked up go into constant timeout and Transmit? I got the info off of status of allstar node 41269. It also will not allow connections to happen and i confirmed port forwarding. Ideas? Keri KB0YNA
Mrs. Keri Varela _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.