Hi Tim, I tried doing an update to your lastest RTCM firmware. One of my RTCM's took the load OK and is working great. One of my voter RTCM's accepts the load OK but as soon as I key up on channel it starts switching the voter radio in and out of TX. TX lite flashs off and on on the front of the RTCM and the RX lite blinks occasionally. I looked at the RTCM on the good one verses the bad one and the setup looks OK. I reloaded the old Voter-SMT.cry and all is well. Any idea's? Bill Hurlock -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request@ohnosec.org Sent: Sunday, August 11, 2013 12:00 PM To: app_rpt-users@ohnosec.org Subject: App_rpt-users Digest, Vol 54, Issue 26 Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org You can reach the person managing the list at app_rpt-users-owner@ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."