enter 1170 to change Sawyer, for example. -- Tim :wq On Aug 16, 2013, at 6:45 PM, Bill Hurlock <bill.hurlock@cpcomms.com> wrote:

Thanks what got me was 18 not being at 0. I entered 111 and it gives Elkes (11730) : 0, Glasers (1103) : 65535, Sawyer (1170) : 255 but can’t change any of that. Next line says Press The Any Key (Enter) To Continue

Bill Hurlock

From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Friday, August 16, 2013 9:06 PM To: Bill Hurlock; app_rpt mailing list Subject: RE: [App_rpt-users] App_rpt-users Digest, Vol 54, Issue 26

There are some "custom" settings (that *REALLY* don't apply to more then 1 or 2 users) that are "hidden" parameters. Use the "111" selection on the main menu to view all of them. If any are non-zero set it (the indicated one, by its number/menu selection) to 0.

Also, check non-hidden, new menu items for non-zero values (particularly the "18" from the main menu).

I just loaded (will be available after 6:15 PDT) a new version of firmware that should make the "upgrade process" a little less poopy.

Jim

...

From: bill.hurlock@cpcomms.com To: app_rpt-users@ohnosec.org Date: Sat, 17 Aug 2013 00:33:37 +0000 Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 54, Issue 26

Hi Tim, I tried doing an update to your lastest RTCM firmware. One of my RTCM's took the load OK and is working great. One of my voter RTCM's accepts the load OK but as soon as I key up on channel it starts switching the voter radio in and out of TX. TX lite flashs off and on on the front of the RTCM and the RX lite blinks occasionally. I looked at the RTCM on the good one verses the bad one and the setup looks OK. I reloaded the old Voter-SMT.cry and all is well. Any idea's?

Bill Hurlock

-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request@ohnosec.org Sent: Sunday, August 11, 2013 12:00 PM To: app_rpt-users@ohnosec.org Subject: App_rpt-users Digest, Vol 54, Issue 26

Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org

You can reach the person managing the list at app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

---

App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

All three of those should be 0 (zero). -- Tim :wq On Aug 17, 2013, at 7:15 AM, Bryan D. Boyle <bdboyle@bdboyle.com> wrote:

On 8/17/2013 1:06 AM, Tim Sawyer wrote:

...

enter 1170 to change Sawyer, for example.

And if we do that...what do you change to?

*ducking*

BB

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users