Skyler, I think you seek a software fix for a electronics problem. The pulse you are getting at rx/cor is from the switching of the TXer and I don't think a software delay is going to fix the issue. Are you toggling the TX with a relay ? Did you put a zener across the coil of the relay if so ? You need to scope the source. Probably at the TX/PTT line / relay contacts, even a transistor may need changed/filtered with a cap. Is frame ground bonded with negative ? Should it be ? Check radio specs. Things to think about. ...mike/kb8jnm On 8/6/2018 6:18 PM, Skyler F wrote:
I am dealing with a system (half duplex), which sends a pulse through the network. I've had this question quite a bit, but never been able to word it right. Hope this is understandable.
This "ping pong" issue only occurs after the transmitter is unkeyed. There is no way to fix this in hardware ( don't need to complicate it by going into technical details on how the link is setup)
RXONDELAY WORKS, but it is sort of pointless because now the beginning of everybody's transmission gets cut off, and is physically does not need to be.
We are really looking for
TX UNKEYS ------> Disable RX ------ > Wait 1/4 second ------> Enable RX
NOT RXONDELAY: USER KEYS ---> DISABLE RX ------> WAIT 1/4 Second -----> ENABLE RX
Is there any way to perform the function in mind? ( in either usbradio, or simpleusb). Has anybody here thought about this before?
Thank You, Skyler KDØWHB
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.