Yes I use that voter. Just trying to help a friend . Sent from my iPhone On Apr 20, 2013, at 11:49 AM, "Tim Sawyer" <tim.sawyer@me.com> wrote:
No one has done that on ACID or Limey Linux that I know of. The Xipar folks have something called the simple voter. See http://www.xelatec.com/xipar/simplevoter -- Tim :wq
On Apr 20, 2013, at 8:29 AM, Corey Dean <n3fe@repeater.net> wrote:
I think you are missing what i am getting at. He will NOT be using rtcm at all. That is why I ask about setting up a computer running acid as the receive site. I need to know what to configure on the pc since we aren't using an rtcm. I doubt the pc will know what the server ants without configuring something on it.
Corey N3FE
On Apr 20, 2013, at 11:21 AM, "Tim Sawyer" <tim.sawyer@me.com> wrote:
Those changes are on the server. The client (the RTCM) has no config files, all settings are done through a menu.
The one line in rpt.conf that changes is:
rxchannel = Voter/1234 ; Voter node 1234 -- Tim :wq
On Apr 20, 2013, at 6:47 AM, Corey Dean <n3fe@repeater.net> wrote:
I am assuming the changes you mention below are for the client (voter) side of things. Where do I find the server side setup? I will still need to know the one line change in rpt.conf.
Corey N3FE ________________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of Tim Sawyer [tim.sawyer@me.com] Sent: Friday, April 19, 2013 11:27 PM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Voter Question
Yes, ACID is the distro that is used with RTCM voting. The difference between a URI and a RTCM set up is minimal. Only one line in rpt.conf needs to be changed. One file, voter.conf is added to the ACID config. That's the entire difference. There is an example voter.conf here: http://ohnosec.org/drupal/node/180. Complete RTCM documentation is available from the micro-node site here: http://206.212.254.21/unode_docs/rtcm_%20manual.pdf
-- Tim :wq
On Apr 19, 2013, at 6:37 PM, Corey Dean <n3fe@repeater.net> wrote:
Hopefully this will change the subject at hand...
I was reading about the acid voters and had a question or more.
I currently run the voting in Zipar so I am not familiar with the way the voter works in the ACID distro. I am trying to understand a few thing in ACID to help a friend. I have seen the rtcm that will act as a voting interface as well as the voting card. Can a regular acid install on a computer be used as a voter as well? If so is their any documentation for this? I know a GPS could be connected up to the computer and a radio with true discriminator audio should do the job. I am just curious if the computer with the ACID distro can also be used as a voter with the right configuration.
Corey N3FE _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=0ACA61FA3.A8987
-- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=3C2BB1FA3.A3363
-- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=D37ED1FA3.A7B99