IRLP nodes did, indeed, used to be in the 4XXXXX range, until 2010 or whenever when Dave asked that IRLP no longer be supported by app_rpt. At which time I sold my IRLP board and pulled my IRLP node. (I will end there before going on to my usual grumbling about IRLP.) On Jan 21, 2014, at 6:54 AM, REDBUTTON_CTRL <jrorke@cogeco.ca> wrote:
If I remember IRLP nodes embedded in Ap_Rpt were prefixed with a 4.
This may simply be a private node perhaps?
VA3RQ
On 1/21/2014 2:44 AM, Doug Crompton wrote:
Are IRLP nodes listed with a preceding '8' ? The reason I ask is that the following showed up in a node listing
************************* CONNECTED NODES *************************
T27133, T29228, T29331, T29477, T29980, T89109
It would make sense that the 89109 was IRLP reflector 9109
If so I want to annotate that in my lsnodes script.
73 Doug WA3DSP http://www.crompton.com/hamradio
_______________________________________________ App_rpt-users mailing list
App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.