Then what you want is to make it a "remote base". That's what a "remote base" is. Jim, WB6NIL
From: jimw7ry@gmail.com To: willem@prinmath.com; n5zua@earthlink.net Date: Fri, 17 Oct 2014 22:03:11 -0700 CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Half duplex Tx override
Only if the node radio is full duplex.
73 Jim W7RY
-----Original Message----- From: Willem Schreuder Sent: Friday, October 17, 2014 9:26 PM To: Steve Agee Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Half duplex Tx override
On Fri, 17 Oct 2014, Steve Agee wrote:
If COR is active, then it is assumed a user is talking in to your node radio to another station remotely. Please explain why it would be desirable to cut them off mid-sentence and have the node begin transmitting. Why would this be what you wanted to have happen?
The radio is operating in SSB, so there is not a reliable detection of incoming signal. So the idea is to just have the node continuously feed the rx audio into the link (it is a private node), and then you just override it on Tx.
73 Willem
================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.