Typo on the radio, I meant 897. Is there a rpt.conf definition for which serial port to use? I didn't see one noted. Sorry for all the question, I am just trying to understand all the capabilities of this system. We have two repeaters working and want to add some remote bases. Gary
-----Original Message----- From: app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] On Behalf Of Jim Duuuude Sent: Monday, October 09, 2006 9:30 AM To: app_rpt@lists.illiana.net Subject: Re: [App_rpt] app_rpt setup and requirements.
As I said, with an ARIB board you would use a PC's serial port for CAT.
I am not familiar with a '787', but (I believe) according to Yaesu, CAT should be the same on all radios that support it. I just know it works on the 897 and like radios.
From: "Gary Young" <pcfrover@tcomeng.com> Reply-To: pcfrover@tcomeng.com,Asterisk Repeater Controler <app_rpt@lists.illiana.net> To: "'Asterisk Repeater Controler'" <app_rpt@lists.illiana.net> Subject: Re: [App_rpt] app_rpt setup and requirements. Date: Mon, 9 Oct 2006 09:03:40 -0700 MIME-Version: 1.0 Received: from lists.illiana.net ([207.227.243.140]) by bay0-mc9-f8.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.2444); Mon, 9 Oct 2006 09:03:49 -0700 Received: (qmail 3395 invoked from network); 9 Oct 2006 16:03:47 -0000 Received: from localhost (HELO ?127.0.0.1?) (127.0.0.1) by 0 with SMTP; 9 Oct 2006 16:03:47 -0000 Received: (qmail 3385 invoked from network); 9 Oct 2006 16:03:44 -0000 Received: from sccrmhc14.comcast.net (204.127.200.84)by 0 with SMTP; 9 Oct 2006 16:03:44 -0000 Received: from den (c-69-181-173-31.hsd1.ca.comcast.net[69.181.173.31])by comcast.net (sccrmhc14) with SMTPid <2006100916034001400qq9pne>; Mon, 9 Oct 2006 16:03:44 +0000 X-Message-Info: LsUYwwHHNt3660MmjhEvYg2f34OAemlKtU9j2Z7TuGo= Return-Path: <pcfrover@tcomeng.com> Delivered-To: mailman-app_rpt@lists.illiana.net X-Mailer: Microsoft Office Outlook 11 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2962 thread-index: AcbrcaBOJrGbAuozSGGWc/wmgygNOwASqXYw X-BeenThere: app_rpt@lists.illiana.net X-Mailman-Version: 2.1.6 Precedence: list List-Id: Asterisk Repeater Controler <app_rpt.lists.illiana.net> List-Unsubscribe: <http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:a pp_rpt-request@lists.illiana.net?subject=unsubscribe> List-Archive: <http://lists.illiana.net/pipermail/app_rpt> List-Post: <mailto:app_rpt@lists.illiana.net> List-Help: <mailto:app_rpt-request@lists.illiana.net?subject=help> List-Subscribe: <http://lists.illiana.net/mailman/listinfo/app_rpt>,<mailto:a pp_rpt-request@lists.illiana.net?subject=subscribe> Errors-To: app_rpt-bounces@lists.illiana.net X-OriginalArrivalTime: 09 Oct 2006 16:03:49.0957 (UTC) FILETIME=[82542750:01C6EBBC]
Is a 'Quad PCI card' required for Yaseu CAT control of a 787 or can one of the standard PC serial ports be used?
Gary
-----Original Message----- From: app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] On Behalf Of Jim Duuuude Sent: Monday, October 09, 2006 12:07 AM To: app_rpt@lists.illiana.net Subject: Re: [App_rpt] app_rpt setup and requirements.
As far as the CAT protocol goes, the ARIB board talks to the "Packet Data interface", the 6 pin connector (I believe), which has the Tx and Rx audio, PTT and COR. The CAT protocol goes through one of the serial ports on the PC. On the PCI card, we talk to the serial port (CAT port) directly also, all through 1 8 pin cable, (which forks off to 2 connectors one 6 pin and one 8 pin on the back of the Yaesu radio).
Yes we fully support CAT in frequency/mode agile mode along as well as the Doug Hall RBI-1 as well as the Kenwood TM-G707.
As far as Digium cards supporting E&M goes, I really think there is VERY little need or desire for such things these days. (Actually the FXS also operates as a DPT like a DID trunk, which technially *is* a 2 wire loop-closure E&M Interface).
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt