I might have to look at that though the G707 seemed like a better option IF I could make it work reliably. How do your ID's work? I have a voice ID and the CWID set as the talkover. I've changed the polite id time from 3 to 300000 and everywhere in between. What I'm regularly seeing is the while someone is transmitting I hear the CWID first then the voice id follows. Is it something with the polite id timing? K0JSC ________________________________ From: Tim Sawyer [mailto:tim.sawyer@me.com] Sent: Thursday, September 20, 2012 7:38 AM To: Matt Roberts Cc: app_rpt-users@ohnosec.org list Subject: Re: [App_rpt-users] Remote Base Memory RX CTCSS We use Motorola Syntor with an Xcat. It works quite well. More Xcat info at http://www.wd6awp.org/xcat/index.html. There's a Yahoo! group too. Here's our node stanza.... [1001] rxchannel = Simpleusb/usb ; Rx audio/signalling channel remote = xcat civaddr = 32 functions = functions-remote lconn = PP3=1 ldisc = PP3=0 memory = memory ; Section to hold memory entries (optional) ; remote=ft897 for Yaesu FT-897 or ; remote=rbi for Doug Hall RBI1 ; remote=kenwood for Kenwood mobiles such as the TMG707A ; remote=ic706 for the Icom IC-706 ioport = /dev/ttyS0 ; Specify port for serial port (optional) iospeed = 19200 dusbabek = yes ;iobase = 0x378 ; Specify IO port for parallel port (optional) authlevel = 2 ; Remote base authentication level ;; authlevel = 0 : Anyone can use it ;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it ;; authlevel = 2 : Requires log in, asks for it automously ;mars = 0 ; set=1 for IC-706 w/MARS mods (optional) remote_inact_timeout=1800 ; Inactivity timer for remote base nodes only (set to 0 to disable). remote_timeout=5400 ; Session time out for remote base. (set to 0 to disable) ;remote_timeout=120 ; Session time out for remote base. (set to 0 to disable) ;remote_timeout_warning=30 -- Tim :wq On Sep 20, 2012, at 12:46 AM, Matt Roberts <n9gmr@me.com> wrote: Add "R"to the end of the memory channel definition. Matt Roberts n9gmr@me.com Sent from my iPhone On Sep 19, 2012, at 10:55 PM, Tim Sawyer <tim.sawyer@me.com> wrote: How is a remote base memory channel programed with P/L decode? For example with this memory: [memory] 09 = 146.895,136.5,l-t -- Tim :wq _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users